Ads
related to: measure baud rate with oscilloscope and multimeter for electrical
Search results
Results From The WOW.Com Content Network
In telecommunications and electronics, baud (/ b ɔː d /; symbol: Bd) is a common unit of measurement of symbol rate, which is one of the components that determine the speed of communication over a data channel. It is the unit for symbol rate or modulation rate in symbols per second or pulses per second.
For example, a query command that performs an AC Volts measurement on a digital multimeter, using the meter's 10 VRMS measurement range, and displaying the measured voltage value with 4-1/2 digits of resolution, would be written as "MEASure:VOLTage:AC? 10,4".
The following items are used for basic measurement of voltages, currents, and components in the circuit under test. Voltmeter (Measures voltage) Ohmmeter (Measures resistance) Ammeter, e.g. Galvanometer or Milliammeter (Measures current) Multimeter e.g., VOM (Volt-Ohm-Milliammeter) or DMM (Digital Multimeter) (Measures all of the above)
Multimeter: General purpose instrument measures voltage, current and resistance (and sometimes other quantities as well) Network analyzer: Measures network parameters Ohmmeter: Measures the resistance of a component Oscilloscope: Displays waveform of a signal, allows measurement of frequency, timing, peak excursion, offset, ... Psophometer
When UI is used as a measurement unit of a time interval, the resulting measure of such time interval is dimensionless. It expresses the time interval in terms of UI. Very often, but not always, the UI coincides with the bit time, i.e. with the time interval taken to transmit one bit (binary information digit).
It is generally accepted that RS-485 can be used with data rates up to 10 Mbit/s [a] or, at lower speeds, distances up to 1,200 m (4,000 ft). [2] As a rule of thumb, the speed in bit/s multiplied by the length in meters should not exceed 10 8. Thus a 50-meter cable should not signal faster than 2 Mbit/s. [3]