Search results
Results From The WOW.Com Content Network
The engine has a displacement of 2.0 L; 121.9 cu in (1,998 cc) with a bore and a stroke of 3.38 in × 3.38 in (86 mm × 86 mm). [2] The compression ratio of the engine is 10.5:1. [2] The 2.0 L engine was offered by Dodge in the Dodge Caliber. Outside North America, the 2.0 was the base engine for the 2007 Chrysler Sebring and 2008 Dodge Avenger.
The 2.4 L (2,389 cc) KA24DE was used in many Nissan cars and trucks. Most KA24DEs bound for the US were built in the city of Aguascalientes, Mexico , with the exceptions of the 240SX, 1994-97 Altima (re-badged Bluebird SSS), and the U13 Bluebird released in Australia with FWD configuration, which were manufactured in Yokohama, Kanagawa , Japan ...
The turbocharger compressor housing features a built-in bypass valve, and the turbo housing is cast into the exhaust manifold with a loop-around flow pattern. The boost level varies anywhere from 11 psi (0.76 bar) to 15 psi (1.0 bar), depending on the PCM's desired torque target and temperature conditions, but will be reduced if significant ...
The 2.4L Theta II Hybrid engine compression ratio is 13.0:1, it features multi-point fuel injection and the gasoline engine produce 171 PS (126 kW; 169 hp) at 6,000 rpm and 21.6 kg⋅m (156 lb⋅ft; 212 N⋅m) of torque at 4,500 rpm, the electric motor is rated 41 PS (30 kW; 40 hp) between 1,400 and 6,000 rpm with 20.9 kg⋅m (151 lb⋅ft; 205 ...
The fuel-injected version referenced above was denoted as the Z24i (Throttle Body Fuel Injection) and was first available in the Nissan Model 720 ST pickup during the 1985 model year and was replaced in 1990 by the KA24E engine and they share the same bellhousing pattern. Beside the fuel-injection, a significant change for the Z24i was the ...
To reduce noise, vibration, and harshness (NVH) levels, the direct injection fuel rail mounts to the cylinder head and valve cover via bushings that isolate the loud ticking noise that injector pintles make. GM claims that the 1.0-liter turbo is 25 percent (3 dBA) quieter than the Ford Fiesta's 1.0-liter turbo, and the 1.4-liter is up to 50 ...
The Volkswagen D24 engine is a 2.4-litre inline-six-cylinder (R6/I6), naturally aspirated diesel engine, formerly manufactured by Volkswagen Group from 1978 to 1995. [1] Subsequent forced induction variants of this engine were also available as the Volkswagen D24T engine with a turbocharger, and a turbo intercooled version, the Volkswagen ...
The Active Fuel Management system can shut down the middle two cylinders under low-power conditions. [2] Cylinder liners are spun nodular iron. [2] The low-output work truck variant runs 10 psi of boost, the 390 lb⋅ft variant runs 20 psi, and the 430 lb⋅ft variant runs 27 psi. [2]