Ads
related to: 350 chevy oil pump gasket
Search results
Results From The WOW.Com Content Network
This was Chevrolet's second 4.3L power plant; four other Chevrolet engines displaced 4.3L: the Vortec 4300 (a V6 based on the Chevrolet 350 cu in (5.7 L), with two cylinders removed), the original 265 cu in (4.3 L) V8 in 1954, a bored version of the stovebolt-era 235 inline six displacing 261 cu in (4.3 L), and a derivative of the Generation II ...
Placing the oil pump low-down uses a near-vertical drive shaft, driven by helical skew gears from the camshaft. Some engines, such as the Fiat Twin Cam engine of 1964, began as OHV engines with an oil pump driven from a conventional camshaft in the cylinder block. When the twin overhead cam engine was developed, the previous oil pump ...
The 260 was designed for economy, and was the first engine option above the Chevrolet 250 straight-six, then later the 3.8 L Buick V6, which was standard fitment in many Oldsmobile models by the late 1970s. While the 260s were not very powerful compared to the larger 350 and 403 V8s, fuel economy was almost as good as the base V6.
The Chevrolet engine debuted in 2002 with part number 1958602 and sold for a little under $4000 in 2012. [28] It has 350 cubic inch displacement via a 4.000 inch bore and 3.480 inch stroke. [29] The 602 engine is equipped with iron heads, a cast-iron block, and aluminum pistons. [28]
The Chevrolet 90° V6 family of V6 engines began in 1978 with the Chevrolet 200 cu in (3.3 L) as the base engine for the all new 1978 Chevrolet Malibu. The original engine family was phased out in early 2014, with its final use as the 4.3 L (262 cu in) V6 engine used in Chevrolet and GMC trucks and vans.
The LF9 is a 350 cu in (5.7 L) diesel V8 produced from 1978 to 1985. Earlier versions and those used in pickups (1978-1981) produced 120 hp (89 kW) at 3,600 rpm and 220 lb⋅ft (298 N⋅m) torque at 1,900 rpm, while later versions produced 105 hp (78 kW) and 205 lb⋅ft (278 N⋅m) torque.