Search results
Results From The WOW.Com Content Network
Device configuration overlay (DCO) is a hidden area on many of today's hard disk drives (HDDs). Usually when information is stored in either the DCO or host protected area (HPA), it is not accessible by the BIOS (or UEFI), OS, or the user.
An mSATA SSD on top of a 2.5-inch SATA drive. Serial ATA (SATA). The SATA data cable has one data pair for differential transmission of data to the device, and one pair for differential receiving from the device, just like EIA-422. That requires that data be transmitted serially.
When this occurs, the drive may appear to be limited in size (e.g. 128 GB), which can look like a BIOS or dynamic drive overlay (DDO) problem. In this case, one must use software utilities (see below) that use READ NATIVE MAX ADDRESS and SET MAX ADDRESS to change the drive's reported size back to its native size, and avoid using the external ...
Some operating systems, notably Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10, do not configure themselves to load the AHCI driver upon boot if the SATA controller was not in AHCI mode at the time the operating system was installed. Although this is an easily rectifiable condition, it remains an ongoing issue with the AHCI ...
External SATA (eSATA) is not supported. HP Imprint Design: Radiance imprint finish; Operating System: Windows Vista Home Premium (32-bit) Dimensions (inches): 13.15 length x 9.33 width x 1.54 maximum closed height; Weight: approximately 5.29 lb (2.40 kg) Accessories: remote control, 65 watt AC power adapter
Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T. or SMART) is a monitoring system included in computer hard disk drives (HDDs) and solid-state drives (SSDs). [3] Its primary function is to detect and report various indicators of drive reliability, or how long a drive can function while anticipating imminent hardware failures. [4] [5]
Prior to the development and ubiquitous adoption of the Plug and Play BIOS standard, an add-on device such as a hard disk controller or a network adapter card (NIC) was generally required to include an option ROM in order to be bootable, as the motherboard BIOS did not include any support for the device and so could not incorporate it into the BIOS's boot protocol.
This technology is still in use today, predominantly in lower-capacity Seagate desktop drives, [8] but has been phased out in 2.5" drives, as well as higher-capacity desktop, NAS, and enterprise drives in favor of load/unload ramps. In general, CSS technology can be prone to increased stiction (the tendency for the heads to stick to the platter ...