Search results
Results From The WOW.Com Content Network
The backward diode has the unusual property that the so-called reverse bias direction actually has more current flow than the so-called forward bias. The forward I–V characteristic is the same as that of an ordinary P–N diode. The breakdown starts when reverse voltage is applied. In the case of Zener breakdown, it starts at a particular ...
English: Band diagram of a backward diode. Energy of an electron is on the vertical axis, position in the device is on the horizontal axis. The backward diode has the unusual property that the so-called reverse bias direction actually has more current flow than the so-called forward bias.
English: Thermionic effect diode under reverse bias (retarding potential or retarding diode), useable for measuring the work function of the cold collector. Date 17 June 2013, 21:31:00
Reverse leakage current in a semiconductor device is the current when the device is reverse biased.. Under reverse bias, an ideal semiconductor device should not conduct any current, however, due to attraction of dissimilar charges, the positive side of the voltage source draws free electrons (majority carriers in the n-region) away from the P-N junction.
It is referred to as reverse bias leakage current in non-optical devices and is present in all diodes. Physically, dark current is due to the random generation of electrons and holes within the depletion region of the device. [1] Dark current is one of the main sources for noise in image sensors such as charge-coupled devices.
Diode–transistor logic (DTL) is a class of digital circuits that is the direct ancestor of transistor–transistor logic. It is called so because the logic gating functions AND and OR are performed by diode logic , while logical inversion (NOT) and amplification (providing signal restoration) is performed by a transistor (in contrast with ...
If any are forward-biased, the shared output wire will be one small forward voltage drop within the forward-biased diode's input. If no diode is forward-biased then no diode will provide drive current for the output's load (such as a subsequent logic stage). So the output additionally requires a pull-up or pull-down resistor connected to a ...
Under reverse bias, the diode equation's exponential term is near 0, so the current is near the somewhat constant reverse current value (roughly a picoampere for silicon diodes or a microampere for germanium diodes, [1] although this is obviously a function of size).