Ad
related to: gas valve with manometer port and plug kit for cars ebay
Search results
Results From The WOW.Com Content Network
A DIN standard for gas cylinder valves for test pressures up to 300 bar (4,400 psi). EN 15202 [9] A European standard for LPG equipment and accessories, specifying LPG cylinder valve connections. [10] EN 417: European norm specification concerning non-refillable metallic cartridges for liquefied petroleum gases.
It is also possible for a plug valve to have more than two ports. In a 3-way plug valve, flow from one port could be directed to either the second or third port. A 3-way plug valve could also be designed to shift flow between ports 1 and 2, 2 and 3, or 1 and 3, and possibly even connect all three ports together.
The inlet pressure gauge will indicate this pressure. The gas then passes through the normally open pressure control valve orifice and the downstream pressure rises until the valve actuating diaphragm is deflected sufficiently to close the valve, preventing any more gas from entering the low pressure side until the pressure drops again.
There were 6,700 fuel stations selling autogas in 2014, supplying about 500,000 registered gas-fuelled cars (1.1 per cent of all cars in Germany). mylpg.eu lists 7.240 stations in 2016. In addition to filling stations, numerous suppliers of industrial gas run dedicated autogas stations on their premises.
Globe valve. A globe valve, different from ball valve, is a type of valve used for regulating flow in a pipeline, consisting of a movable plug or disc element and a stationary ring seat in a generally spherical body. [1] Globe valves are named for their spherical body shape with the two halves of the body being separated by an internal baffle.
The poppet valve is different from both slide and oscillating valves. Instead of sliding or rocking over a seat to uncover a port, the poppet valve lifts from the seat with a movement perpendicular to the plane of the port. The main advantage of the poppet valve is that it has no movement on the seat, thus requiring no lubrication. [7]
Valve seats are often formed by first press-fitting an approximately cylindrical piece of a hardened metal alloy, such as Stellite, into a cast depression in a cylinder head above each eventual valve stem position, [1] and then machining a conical-section surface into the valve seat that will mate with a corresponding conical section of the ...
Two flow positions on a four-way valve. The four-way valve or four-way cock is a fluid control valve whose body has four ports equally spaced round the valve chamber and the plug has two passages to connect adjacent ports. The plug may be cylindrical or tapered, or a ball.