Search results
Results From The WOW.Com Content Network
An 1883 article from The American Architect and Building News compares three alternatives in a hypothetical railway station "in which the second story is devoted to offices, and where we must use girders to support the second floor of 25-foot span, and not less than 12 feet on centres if we can avoid it.
Wall framing in house construction includes the vertical and horizontal members of exterior walls and interior partitions, both of bearing walls and non-bearing walls. . These stick members, referred to as studs, wall plates and lintels (sometimes called headers), serve as a nailing base for all covering material and support the upper floor platforms, which provide the lateral strength along a
The Braga Bridge is a continuous truss bridge. It was the fourth longest span of this type when it was completed in 1966. This list of continuous bridge spans ranks the world's continuous truss bridges in two listings: The first is ranked by the length of main span (the longest length of unsupported roadway) and the second by the total length of continuous truss spans.
The panels are 10-foot-long (3.0 m), 5-foot-high (1.5 m), cross-braced rectangles that each weigh 570 pounds (260 kg), and can be lifted by four men. The panel was constructed of welded steel. The top and bottom chord of each panel had interlocking male and female lugs into which engineers could insert panel connecting pins.
The clearance for overhead signs is 5.7 metres (18 ft 8 in) and the clearance for the soffit or underside of overpasses is 10 metres (32 ft 10 in). [ 6 ] In South Africa and the southern region of Africa, the minimum vertical clearance of modern bridges is 5 metres (16 ft 5 in), although the legal height limit of road vehicles is still at 4.3 ...
The LH- and DLH-Series have been designed for the purpose of extending the use of joists to spans and loads in excess of those covered by Open Web Steel Joists, K-Series. LH-Series Joists have been standardized in depths from 18 inches (460 mm) through 48 inches (1,200 mm), for spans through 96 feet (29,000 mm).
Not shown is the rare, but also possible combination of a 30-foot container coupled to a 10-foot box, in a 40(+) foot long stack. The ISO 668 standard firstly classifies containers by their length in whole feet for their 'common names', despite all measurement units used being either metric (SI) or officially based on the metric system .
The early twin tee spans were between 20 feet (6.1 m) and 25 feet (7.6 m). Those double tee spans were first used for the first time to build a cold storage building for Beatrice Foods in Denver. [3] The early double tee spans of 25 feet (7.6 m) had grown to 50 feet (15 m) quickly.