Ads
related to: mig welding gas 75 25 in electric skillet with 3 wood legs
Search results
Results From The WOW.Com Content Network
A-25 (25% argon/75% helium) is used for nonferrous base when higher heat input and good weld appearance are needed. A-50 (50% argon/50% helium) is used for nonferrous metals thinner than 0.75 inch for high-speed mechanized welding. A-75 (75% argon/25% helium) is used for mechanized welding of thick aluminium. Reduces weld porosity in copper. [14]
Spray transfer GMAW. Gas metal arc welding (GMAW), sometimes referred to by its subtypes metal inert gas (MIG) and metal active gas (MAG) is a welding process in which an electric arc forms between a consumable MIG wire electrode and the workpiece metal (s), which heats the workpiece metal (s), causing them to fuse (melt and join).
Flux-cored arc welding (FCAW or FCA) is a semi-automatic or automatic arc welding process. FCAW requires a continuously-fed consumable tubular electrode containing a flux and a constant- voltage or, less commonly, a constant- current welding power supply. An externally supplied shielding gas is sometimes used, but often the flux itself is ...
Electrogas welding. Electrogas welding (EGW) is a continuous vertical-position arc welding process developed in 1961 in which an arc is struck between a consumable electrode and the workpiece. A shielding gas is sometimes used, but pressure is not applied. A major difference between EGW and its cousin, electroslag welding, is that the arc in ...
Two pointed electrodes apply pressure and current to two or more thin workpieces. Automobile industry, Aerospace industry. Resistance seam welding [6] 22. RSEW. Two wheel-shaped electrodes roll along workpieces, applying pressure and current. Aerospace industry, steel drums, tubing. Projection welding. 23.
The legs are the other two sides of the triangular fillet weld. The leg length is usually designated as the size of the weld. The throat of the weld is the distance from the center of the face to the root of the weld. Typically the depth of the throat should be at least as thick as the thickness of metal you are welding. [1]