Search results
Results From The WOW.Com Content Network
Letterhead can then be printed on stationery or plain paper, as needed, on a local output device or sent electronically. Letterheads are generally printed by either the offset or letterpress methods. In most countries outside North America, company letterheads are printed A4 in size (210 mm x 297 mm). [1]
The most used of this series is the size A4, which is 210 mm × 297 mm (8.27 in × 11.7 in) and thus almost exactly 1 ⁄ 16 square metre (0.0625 m 2; 96.8752 sq in) in area. For comparison, the letter paper size commonly used in North America ( 8 + 1 ⁄ 2 in × 11 in; 216 mm × 279 mm) is about 6 mm ( 0.24 in ) wider and 18 mm ( 0.71 in ...
The alternative Super series, denoted SnR, nR Plus or nR+, has an aspect ratio of 3∶2 (or as close as possible) and thus provides a better fit for standard 135 film (35 mm) at sizes of 8 inches or above. 5R is twice the size of a 2R print, 6R twice the size of a 4R print and S8R twice the size of 6R. 4D/6D is a newer size for most consumer ...
±1 mm (0.04 in) for dimensions up to 150 mm (5.9 in), ±1.5 mm (0.06 in) for lengths in the range 150 mm to 600 mm (5.9 to 23.6 in) and; ±2 mm (0.08 in) for any dimension above 600 mm (23.6 in). There used to be a standard, DIN 198, that was just a table of recommended A series formats for a number of business applications.
The pica is a typographic unit of measure corresponding to approximately 1 ⁄ 6 of an inch, or from 1 ⁄ 68 to 1 ⁄ 73 of a foot. One pica is further divided into 12 points. In printing, three pica measures are used: The French pica of 12 Didot points (also called cicero) generally is: 12 × 0.376 = 4.512 mm (0.1776 in).
The precise origins of the dimensions of US letter-size paper (8.5 × 11 in) are not known. The American Forest & Paper Association says that the standard US dimensions have their origin in the days of manual papermaking, the 11-inch length of the standard paper being about a quarter of "the average maximum stretch of an experienced vatman's arms". [2]
The traditional typographic units are based either on non-metric units, or on odd multiples (such as 35 ⁄ 83) of a metric unit.There are no specifically metric units for this particular purpose, although there is a DIN standard sometimes used in German publishing, which measures type sizes in multiples of 0.25 mm, and proponents of the metrication of typography generally recommend the use of ...
The French National Print Office adopted a point of 2 ⁄ 5 mm or 0.400 mm in about 1810 and continues to use this measurement today (though "recalibrated" to 0.398 77 mm). [ 21 ] [ 22 ] [ 23 ] Japanese [ 24 ] and German [ 9 ] [ 16 ] [ 18 ] standardization bodies instead opted for a metric typographic base measure of exactly 1 ⁄ 4 mm or 0.250 ...