Ads
related to: din rail rack mount
Search results
Results From The WOW.Com Content Network
A DIN rail is a metal rail of a standard type widely used for mounting circuit breakers and industrial control equipment inside equipment racks.These products are typically made from cold rolled carbon steel sheet with a zinc-plated or chromated bright surface finish.
The distance of the right edge of the right mounting rail to the left edge of the left mounting rail is 535 millimetres (21.1 in). As 535 mm is very close to 21 inches, these racks are sometimes called 21-inch racks. The gap between the posts is 500 millimetres (19.69 in).
Rack Rail comes in two different commonly used forms. Tapped/threaded rack rail has round holes tapped for 10-32 UNF or 10-24 UNC screws. The other common form of rack rail is square hole rack strip which has square holes for captive nuts, available tapped for various different screw threads, that are clipped into the holes as needed to mount equipment.
Rack with sample component sizes including an A/V half-rack unit. A rack unit (abbreviated U or RU) is a unit of measure defined as 1 + 3 ⁄ 4 inches (44.45 mm). [1] [2] It is most frequently used as a measurement of the overall height of 19-inch and 23-inch rack frames, as well as the height of equipment that mounts in these frames, whereby the height of the frame or equipment is expressed ...
DIN 41652-2: Rack and panel connectors; trapezoidal, round contacts 1 mm; ratings, requirements, tests: Active: DIN 41750-1: Rack and panel connectors, trapezoidal, round contacts ø1 mm; common mounting features and dimensions; survey of types: Active: DIN 41750-2: Rack and panel connectors, trapezoidal, round contacts ø1 mm; ratings ...
A common use for cage nuts is to mount equipment in square-holed 19-inch racks (the most common type), with 0.375 inches (9.5 mm) square-hole size. There are four common sizes: UNF 10–32 and, to a lesser extent, UNC 12–24 are generally used in the United States; elsewhere, M5 (5 mm outside diameter and 0.8 mm pitch) for light and medium equipment and M6 for heavier equipment, such as servers.