Search results
Results From The WOW.Com Content Network
0.202 mPa·S (cP) Viscosity at 25 °C, vapor at 1 atm 0.012 mPa·S (cP) Solubility in water at 25 °C and 1 atm 0.15% by weight Solubility of water in HFC-134a at 25 °C 0.11% by weight Flammability Limits in Air at 1 atm None Autoignition temperature 770 °C (1,420 °F) Ozone depletion potential: 0 Halocarbon Global Warming Potential (HGWP)
1,1,1,2-Tetrafluoroethane (also known as norflurane (), R-134a, Klea 134a, Freon 134a, Forane 134a, Genetron 134a, Green Gas, Florasol 134a, Suva 134a, HFA-134a, or HFC-134a) is a hydrofluorocarbon (HFC) and haloalkane refrigerant with thermodynamic properties similar to R-12 (dichlorodifluoromethane) but with insignificant ozone depletion potential and a lower 100-year global warming ...
Normal boiling points for pure substances, bubble and dew points for zeotropic blends, or normal boiling point and azeotropic temperature for the azeotropic blends, at 101,325 Pa (1 atmosphere) and in degrees Celsius; Critical temperature in degrees Celsius; Absolute critical pressure in kilopascals
Values are given in terms of temperature necessary to reach the specified pressure. Valid results within the quoted ranges from most equations are included in the table for comparison. A conversion factor is included into the original first coefficients of the equations to provide the pressure in pascals (CR2: 5.006, SMI: -0.875).
Pressure ; unit unit-code symbol or abbrev. sample default conversion gigapascal: GPa GPa 1.0 GPa (150,000 psi) megapascal: MPa MPa 1.0 MPa (150 psi) kilopascal: kPa kPa 1.0 kPa (0.15 psi) hectopascal: hPa hPa 1.0 hPa (0.015 psi) pascal: Pa Pa 1.0 Pa (0.00015 psi) millipascal: mPa mPa 1.0 mPa (1.5 × 10 −7 psi) millibar: mbar mbar 1.0 mbar (1 ...
0.8–2 MPa 120–290 psi Pressure used in boilers of steam locomotives [citation needed] 1.1 MPa 162 psi Pressure of an average human bite [citation needed] 2.8–8.3 MPa 400–1,200 psi Pressure of carbon dioxide propellant in a paintball gun [64] 5 MPa 700 psi Water pressure of the output of a coin-operated car wash spray nozzle [58] 5 MPa ...
Convert mmHg to SI units as follows: 1 mmHg = 0.133 32 kPa. Hence the normal blood pressure in SI units is less than 16.0 kPa SBP and less than 10.7 kPa DBP. These values are similar to the pressure of water column of average human height; so pressure has to be measured on arm roughly at the level of the heart.
Since 1982, STP has been defined as a temperature of 273.15 K (0 °C, 32 °F) and an absolute pressure of exactly 1 bar (100 kPa, 10 5 Pa). NIST uses a temperature of 20 °C (293.15 K, 68 °F) and an absolute pressure of 1 atm (14.696 psi, 101.325 kPa). [3] This standard is also called normal temperature and pressure (abbreviated as NTP).