Search results
Results From The WOW.Com Content Network
The activated sludge process is a type of biological wastewater treatment process for treating sewage or industrial wastewaters using aeration and a biological floc composed of bacteria and protozoa. It is one of several biological wastewater treatment alternatives in secondary treatment , which deals with the removal of biodegradable organic ...
Sludge treatment technologies that are used for thickening or dewatering of sludge have two products: the thickened or dewatered sludge, and a liquid fraction which is called sludge treatment liquids, sludge dewatering streams, liquors, centrate (if it stems from a centrifuge), filtrate (if it stems from a belt filter press) or similar.
Sewage sludge treatment is the process of removing contaminants from wastewater.Sewage sludge is produced from the treatment of wastewater in sewage treatment plants and consists of two basic forms — raw primary sludge and secondary sludge, also known as activated sludge in the case of the activated sludge process.
Activated sludge model; Activated sludge systems; Adsorption/Bio-oxidation process; Advanced oxidation process; Aerated lagoon; Aerobic granular reactor; Aerobic granular sludge technology; Aerobic granulation; Aerobic treatment system; Anaerobic clarigester; Anaerobic digester types; Anaerobic digestion; Anaerobic filter; Anaerobic lagoon ...
It has not been discovered as of yet, where 100% of the sludge is in granular form. Most aerobic granular sludge has 50% and the remaining composition is dense microorganism. Overall, wastewater treatment technology is new and it will be difficult to replace conventional activated sludge processes for the usage of wastewater treatment. [7]
Extended aeration agitates all incoming waste in the sludge from a single clarifier. The combined sludge starts with a higher concentration of inert solids than typical secondary sludge and the longer mixing time required for digestion of primary solids in addition to dissolved organics produces aged sludge requiring greater mixing energy input per unit of waste oxidized.
The ATS process generally consists of the following phases: [2] Pre-treatment stage to remove large solids and other undesirable substances. Aeration stage, where aerobic bacteria digest biological wastes. Settling stage allows undigested solids to settle. This forms a sludge that must be periodically removed from the system.
The quantity or “age” of sludge within the tank is closely monitored, as this can have a marked effect on the treatment process. The sludge is allowed to settle until clear water is on the top 20 to 30 percent of the tank contents. The decanting stage most commonly involves the slow lowering of a scoop or “trough” into the basin.