Ads
related to: lifepo4 battery discharge limit
Search results
Results From The WOW.Com Content Network
The energy density (energy/volume) of a new LFP battery as of 2008 was some 14% lower than that of a new LiCoO 2 battery. [46] Since discharge rate is a percentage of battery capacity, a higher rate can be achieved by using a larger battery (more ampere hours) if low-current batteries must be used.
The most notable difference between lithium iron phosphate and lead acid is the fact that the lithium battery capacity shows only a small dependence on the discharge rate. With very high discharge rates, for instance 0.8C, the capacity of the lead acid battery is only 60% of the rated capacity.
While the state of charge is usually expressed using percentage points (0 % = empty; 100 % = full), depth of discharge is either expressed using units of Ah (e.g. for a 50 Ah battery, 0 Ah is full and 50 Ah is empty) or percentage points (100 % is empty and 0 % is full). The capacity of a battery may also be higher than its nominal rating.
The Headway 38120HP cells are used in high-discharge environments as they have very good continuous/peak discharge rates (10C/25C). Because four cells in series produces a voltage range similar to 6 cells of lead-acids and their fire-resistant properties, they can be used to replace a 12 V lead-acid car battery.
For example, consider a battery with a capacity of 200 Ah at the C 20 rate (C 20 means the 20-hour rate – i.e. the rate that will fully discharge the battery in 20 hours – which in this case is 10 A). If this battery is discharged at 10 A, it will last 20 hours, giving the rated capacity of 200 Ah.
Low self-discharge nickel–metal hydride battery: 500–1,500 [14] Lithium cobalt oxide: 90 500–1,000 Lithium–titanate: 85–90 6,000–30,000 to 90% capacity