Search results
Results From The WOW.Com Content Network
With the slogan “The challenger“, the HATZ 1B-series was presented in 1996, showing a number of technical highlights. In a minimum of space, all the important functional components of the engine such as decompression device, injection pump drive, oil pump with oil pump pressure regulator, valve train system for inlet and outlet valve, governor, speed control lever with governor spring and ...
After the war, the French designed and built the AMX-50 series of armoured fighting vehicles, which used a 1000 hp Maybach engine with rear drive, as had been intended for the E-50 and E-75, whilst the idea of external Belleville washer suspension - which was also developed with the Entwicklung series in mind - resurfaced on the Swiss Panzer 61.
The cabin width is 26 in (66 cm). The acceptable power range is 150 to 160 hp (112 to 119 kW) and the standard engine used is the 150 hp (112 kW) Lycoming O-320 powerplant. [1] [2] [3] The Hatz Classic has a typical empty weight of 1,050 lb (480 kg) and a gross weight of 1,700 lb (770 kg), giving a useful load of 650 lb (290 kg).
This engine was designed in 1998 with the related 4-cylinder variant R 420 SOHC. In 1999, VM granted Hyundai the license to manufacture both engines. Under terms of the agreement, Hyundai was able to manufacture the engines only to power its vehicles, while VM was free to grant other license agreements also in Korea, as happened in 2004 with GM ...
John Hatz designed the CB-1 in 1968 as a smaller version of a Waco F series biplane. The CB-1 is a tandem dual-control two-seat biplane with fixed tailwheel landing gear and powered by a variety of nose-mounted small engines. Steel tube fuselage and tail with wooden wings. Plans and kits of parts for the CB-1 are available for amateur construction.
To further compete with Volvo Penta, BMW added small diesel auxiliary sail boat engines, ranging from 7 to 50 horsepower, to the BMW Marine product lineup. The engines were based on four air-cooled diesel engines manufactured by Hatz, then marinized by BMW Marine. Hurth Marine transmissions and instrument panels were added, and the resulting ...
The Kelly-D is a development of the Hatz CB-1, but with more wingspan and fuselage length, and with more cockpit space for larger pilots. It features a strut-braced biplane layout, two seats in separate tandem open cockpits with individual windshields, fixed conventional landing gear and a single engine in tractor configuration.
The Continental O-190 (Company designations C75 and C85) is a series of engines made by Continental Motors beginning in the 1940s. Of flat-four configuration, the engines produced 75 hp (56 kW) or 85 hp (63 kW) respectively. [1] The two variants shared the same bore, stroke and compression ratio.