Search results
Results From The WOW.Com Content Network
Lime softening (also known as lime buttering, lime-soda treatment, or Clark's process) [1] is a type of water treatment used for water softening, which uses the addition of limewater (calcium hydroxide) to remove hardness (deposits of calcium and magnesium salts) by precipitation.
Water softening is the removal of calcium, magnesium, and certain other metal cations in hard water. The resulting soft water requires less soap for the same cleaning effort, as soap is not wasted bonding with calcium ions.
He became known for the discovery of the phosphate of soda, and the process of lime softening of hard water the 'Clark process'. A Clark degree (°Clark) of water hardness is defined as one grain (64.8 mg) of CaCO 3 per Imperial gallon (4.55 litres) of water, equivalent to 14.254 ppm. and 10^5 parts of water
In the lime industry, limestone is a general term for rocks that contain 80% or more of calcium or magnesium carbonate, including marble, chalk, oolite, and marl.Further classification is done by composition as high calcium, argillaceous (clayey), silicious, conglomerate, magnesian, dolomite, and other limestones. [5]
Lime softening process precipitates Ca 2+ and Mg 2+ ions / removes hardness in the water and also converts sodium bicarbonates in river water into sodium carbonate. [2] Sodium carbonates (washing soda) further reacts with the remaining Ca 2+ and Mg 2+ in the water to remove / precipitate the total hardness .
Early on, softened water produced by technologies like zeolite softening or cold lime softening was a precursor to modern UPW treatment. From there, the term "deionized" water was the next advancement as synthetic IX resins were invented in 1935 and then became commercialized in the 1940s. The earliest "deionized" water systems relied on IX ...
The site also encompasses a water softening plant, fed by the pumping engine, and three lime kilns that were used to supply the water softening plant and that were in turn fed by on-site chalk pits. There is also a 2 ft (610 mm) gauge industrial railway, including a rope-hauled inclined plane, used to transport materials around the site. [1] [4 ...
Carbonatation is a slow process that occurs in concrete where lime (CaO, or Ca(OH) 2 ) in the cement reacts with carbon dioxide (CO 2) from the air and forms calcium carbonate. The water in the pores of Portland cement concrete is normally alkaline with a pH in the range of 12.5 to 13.5.