Search results
Results From The WOW.Com Content Network
Dove and Rose jacquard-woven silk and wool double cloth furnishing textile, designed by William Morris in 1879. [1]Double cloth or double weave (also doublecloth, double-cloth, doubleweave) is a kind of woven textile in which two or more sets of warps and one or more sets of weft or filling yarns are interconnected to form a two-layered cloth. [2]
The development of the rapier loom began in 1844, when John Smith of Salford was granted a patent on a loom design that eliminated the shuttle typical of earlier models of looms. [3] Subsequent patents were taken out by Phillippe and Maurice in 1855, W.S. Laycock in 1869, and W. Glover in 1874, with rigid rapiers being perfected by O ...
In the manufacture of cloth, warp and weft are the two basic components in weaving to transform thread and yarn into textile fabrics. The vertical warp yarns are held stationary in tension on a loom (frame) while the horizontal weft (also called the woof) is drawn through (inserted over and under) the warp thread. [1]
This was then passed through the finisher card to produce the rovings [7] This process was known as double carding. The Derby Doubler was patented by Evan Leigh of Ashton-under-Lyne (21 December 1810 – 2 February 1876) and, though superseded, still continued in service in condensing coarse counts.
There is no need for layering to create a part, because a single fabric provides the full three-dimensional reinforcement. The 3-D woven fabric is a variant of the 2D weaving process, and it is an extension of the very old technique of creating double and triple woven cloth. 3D weaving allows the production of fabrics up to 10 cm in thickness. [1]
There are several types of 3D woven fabrics that are commercially available; they can be classified according to their weaving technique. [8]3D woven interlock fabrics, are 3D woven fabrics produced on a traditional 2D weaving loom, using proper weave design and techniques, it could either have the weaver/z-yarn going through all the thickness of the fabric or from layer to layer.
Supplementary weaving is a decorative technique in which additional threads are woven into a textile to create an ornamental pattern in addition to the ground pattern. The supplementary weave can be of the warp or of the weft. [ 1 ]
With each weaving operation, the newly constructed fabric must be wound on a cloth beam. This process is called taking up. At the same time, the warp yarns must be let off or released from the warp beams. To become fully automatic, a loom needs a filling stop motion which will brake the loom, if the weft thread breaks.