Ads
related to: cheap osb board 9mm 8x4 plywood home depot 1 2 cdx
Search results
Results From The WOW.Com Content Network
Oriented strand board (OSB) is a type of engineered wood, formed by adding adhesives and then compressing layers of wood strands (flakes) in specific orientations. It was invented by Armin Elmendorf in California in 1963. [ 1 ]
EPS is the most common of the foams used and has an R-value (thermal resistance) of about 4 °F·ft 2 ·h/Btu (equivalent to about 0.7 K·m 2 /W) per 25 mm thickness, which would give the 3.5 inches (89 mm) of foam in a 4.5-inch-thick (110 mm) panel an R value of 13.8 (caution: extrapolating R-values over thickness may be imprecise due to non ...
Plywood and OSB typically have a density of 560–640 kg/m 3 (35–40 lb/cu ft). For example, 9.5 mm (3 ⁄ 8 in) plywood sheathing or OSB sheathing typically has a surface density of 4.9–5.9 kg/m 2 (1–1.2 lb/sq ft). [51] Many other engineered woods have densities much higher than OSB.
Plywood is a composite material manufactured from thin layers, or "plies", of wood veneer that have been stacked and glued together. It is an engineered wood from the family of manufactured boards, which include plywood, medium-density fibreboard (MDF), oriented strand board (OSB), and particle board (or chipboard).
Medium density overlay panel, or MDO panel, is a paintable surface made of plywood with a weather-resistant resin overlay bonded to the wood by heat and pressure. The overlay, which has at least 27% resin content, [1] resists water, weather, wear and degradation. A similar product with a more rugged, smoother surface is called high density ...
Louisiana-Pacific begins marketing its Oriented Strand Board (OSB) as an exterior siding. 1990: Lawsuits relating to defective OSB exterior siding begin. 1996: Mark Suwyn replaces Merlo as chairman and CEO. 1998: Louisiana-Pacific acquires ABT Building Products as part of its effort to focus on the building products market. 2002
Board is then cooled, trimmed, sanded and maybe veneered or laminated. UF resins are dominantly used in the MDF industry because of their low cost and fast curing characteristics. [ 2 ] However, pressures on the use of UF resins are mounting steadily due to potential problems associated with formaldehyde emission. [ 3 ]
Hardboard is similar to particle board and medium-density fiberboard, but is denser, stronger and harder because it is made out of exploded wood fibers that have been highly compressed. [ 3 ] The density of hardboard is higher than 500 kg/m 3 (31 lb/cu ft), [ 4 ] usually about 800–1,040 kg/m 3 (50–65 lb/cu ft). [ 5 ]