Search results
Results From The WOW.Com Content Network
Saybolt universal viscosity (SUV), and the related Saybolt FUROL viscosity (SFV), are specific standardised tests producing measures of kinematic viscosity. FUROL is an acronym for fuel and road oil. [1] Saybolt universal viscosity is specified by the ASTM D2161. Both tests are considered obsolete to other measures of kinematic viscosity, but ...
Consequently, if a liquid has dynamic viscosity of n centiPoise, and its density is not too different from that of water, then its kinematic viscosity is around n centiStokes. For gas, the dynamic viscosity is usually in the range of 10 to 20 microPascal-seconds, or 0.01 to 0.02 centiPoise. The density is usually on the order of 0.5 to 5 kg/m^3.
But SAE also allows designating an oil with two viscosity grades, referred to as a multi-grade oil. For example, 10W-30 designates a common multi-grade oil. A 10W-30 oil must pass the SAE J300 viscosity grade requirements for both 10W and 30, and all limitations placed on the viscosity grades, such as the requirement that a 10W oil must fail ...
Extensional viscosity can be measured with various rheometers that apply extensional stress. Volume viscosity can be measured with an acoustic rheometer. Apparent viscosity is a calculation derived from tests performed on drilling fluid used in oil or gas well development. These calculations and tests help engineers develop and maintain the ...
RSPP – a publicly-traded oil and gas producer focused on horizontal drilling of multiple stacked pay zones in the oil-rich Permian basin [citation needed] [clarification needed] RSS – rig site survey; RSS – rotary steerable systems; RST – reservoir saturation tool (Schlumberger) log; RTMS – riser tension monitoring system
SAE J306 is a standard that defines the viscometric properties of automotive gear oils.It is maintained by SAE International. [1] Key parameters for this standard are the kinematic viscosity of the gear oil, the maximum temperature at which the oil has a viscosity of 150,000 cP, and a measure of its shear stability through the KRL test.
where U is the oil's kinematic viscosity at 40 °C (104 °F), Y is the oil's kinematic viscosity at 100 °C (212 °F), and L and H are the viscosities at 40 °C for two hypothetical oils of VI 0 and 100 respectively, having the same viscosity at 100 °C as the oil whose VI we are trying to determine.
In line with car manufacturers push towards these lower viscosities in search of better fuel economy, in April 2013 the Society of Automotive Engineers (SAE) introduced an SAE 16 viscosity rating, a break from its traditional "divisible by 10" numbering system for its high-temperature viscosity ratings that spanned from low-viscosity SAE 20 to ...