Search results
Results From The WOW.Com Content Network
The boot ROM is either placed on the same die as the CPU or is an external ROM chip. On modern systems, the boot ROM (whether integrated into CPU or external ROM chip) is usually use NOR flash which supports execute in place. The boot ROM will then initialize the hardware busses and peripherals needed to boot.
The Primary Bootloader (PBL), which is stored in the Boot ROM [3] is the first stage of the boot process. This code is written by the chipset manufacturer. [4] The PBL verifies the authenticity of the next stage. On Samsung smartphones, the Samsung Secure Boot Key (SSBK) is used by the boot ROM to verify the next stages. [5]
As with the second-stage boot loader, network booting begins by using generic network access methods provided by the network interface's boot ROM, which typically contains a Preboot Execution Environment (PXE) image. No drivers are required, but the system functionality is limited until the operating system kernel and drivers are transferred ...
As with the second-stage boot loader, network booting begins by using generic network access methods provided by the network interface's boot ROM, which typically contains a Preboot Execution Environment (PXE) image. No drivers are required, but the system functionality is limited until the operating system kernel and drivers are transferred ...
An option ROM for the PC platform (i.e. the IBM PC and derived successor computer systems) is a piece of firmware that resides in ROM on an expansion card (or stored along with the main system BIOS), which gets executed to initialize the device and (optionally) add support for the device to the BIOS.
A bootable device can be storage devices like floppy disk, CD-ROM, USB flash drive, a partition on a hard disk (where a hard disk stores multiple OS, e.g Windows and Fedora), a storage device on local network, etc. [7] A hard disk to boot Linux stores the Master Boot Record (MBR), which contains the first-stage/primary bootloader in order to be ...
A modern PC is configured to attempt to boot from various devices in a certain order. If a computer is not booting from the device desired, such as the floppy drive, the user may have to enter the BIOS Setup function by pressing a special key when the computer is first turned on (such as Delete, F1, F2, F10 or F12), and then changing the boot order. [6]
reboot – reboots the device into either the main operating system, the system recovery partition or back into its boot loader. devices – displays a list of all devices (with the serial number) connected to the host computer. format – formats a specific partition; the file system of the partition must be recognized by the device.