Search results
Results From The WOW.Com Content Network
The boot loader is responsible for accessing the file system on the boot drive, starting ntoskrnl.exe, and loading boot-time device drivers into memory. Once all the boot and system drivers have been loaded, the kernel starts the session manager (smss.exe), which begins the login process.
The boot loader on the option ROM would attempt to boot from a disk, network, or other boot program source attached to or installed on the adapter card; if that boot attempt failed, it would pass control to the previous boot loader (to which INT 19h pointed before the option ROM hooked it), allowing the system to boot from another device as a ...
Typically, the system firmware (UEFI or BIOS) will allow the user to configure a boot order. If the boot order is set to "first, the DVD drive; second, the hard disk drive", then the firmware will try to boot from the DVD drive, and if this fails (e.g. because there is no DVD in the drive), it will try to boot from the local hard disk drive.
Microsoft boot sectors, therefore, traditionally imposed certain restrictions on the boot process. For example, the boot file had to be located at a fixed position in the root directory of the file system and stored within consecutive sectors, [7] [8] conditions taken care of by the SYS command and slightly relaxed in later versions of DOS.
provide a user interface for system's configuration; construct whatever system environment is required by the target operating system; In early BIOSes, POST did not organize or select boot devices, it simply identified floppy or hard disks, which the system would always try to boot in that order.
This typically contains NTLDR and is launched by the boot BLOB. Part BLOB This contains the actual boot runtime (i.e. the contents of the disk image including any Operating System [OS] files) and also includes the boot.ini (used by NTLDR) and ntdetect.com files which should be located within the root directory of the runtime. The size of the ...
When a system on a chip (SoC) enters suspend to RAM mode, in many cases, the processor is completely off while the RAM is put in self refresh mode. At resume, the boot ROM is executed again and many boot ROMs are able to detect that the SoC was in suspend to RAM and can resume by jumping directly to the kernel which then takes care of powering on again the peripherals which were off and ...
The Windows boot manager is located at the \EFI\Microsoft\Boot\ subfolder of the EFI system partition. [23] On Windows XP 64-Bit Edition and later, access to the EFI system partition is obtained by running the mountvol command. Mounts the EFI system partition on the specified drive. Available on Itanium-based computers only. [24]