Search results
Results From The WOW.Com Content Network
Finger-jointed lumber – solid dimensional lumber lengths typically are limited to lengths of 22 to 24 feet (6.7–7.3 m), but can be made longer by the technique of "finger-jointing" by using small solid pieces, usually 18 to 24 inches (460–610 mm) long, and joining them together using finger joints and glue to produce lengths that can be ...
The front face is the same as a cord 4 by 8 feet (1.2 by 2.4 m), hence the name. The depth is generally 16 inches (410 mm) (for use in residential fireplaces) but can be anything from 12 to 32 inches (300 to 810 mm). This results in a volume of 32 to 85 cubic feet (0.91 to 2.41 m 3). In the United States, several states only allow wood to be ...
A cord is the amount of wood that, when "racked and well stowed" (arranged so pieces are aligned, parallel, touching, and compact), occupies a volume of 128 cubic feet (3.62 m 3). [1] This corresponds to a well-stacked woodpile 4 feet (122 cm) high, 8 feet (244 cm) wide, and 4 feet (122 cm) deep; or any other arrangement of linear measurements ...
Australian standard pallets are defined by Australian Standard AS:4068-1993 Flat pallets for materials handling. [2] They can be manufactured in hardwood or softwood, where hardwood is good for durability, weather tolerance and very heavy loads of over 2 tonne. 1165 × 1165 mm softwood pallets can also be manufactured using lighter timber suitable for use as a lightweight pallet using 19mm ...
Timber design or wood design is a subcategory of structural engineering that focuses on the engineering of wood structures. Timber is classified by tree species (e.g., southern pine, douglas fir, etc.) and its strength is graded using numerous coefficients that correspond to the number of knots, the moisture content, the temperature, the grain ...
The most common dimension is 1.2 by 2.4 metres (3 ft 11 in × 7 ft 10 in) or the slightly larger imperial dimension of 4 feet × 8 feet. Plies vary in thickness from 1.4 mm to 4.3 mm. The number of plies—which is always odd—depends on the thickness and grade of the sheet. Roofing can use the thinner 16-millimetre (5 ⁄ 8 in) plywood.
The wood is categorized as a board if its width is less than 2 + 1 ⁄ 2 in (64 mm), and its thickness is less than 1 + 1 ⁄ 2 in (38 mm). A plank used in a building as a horizontal supporting member that runs between foundations, walls, or beams to support a ceiling or floor is called a joist.
Scantling is a measurement of prescribed size, dimensions, or cross sectional areas.. When used in regard to timber, the scantling is (also "the scantlings are") the thickness and breadth, the sectional dimensions; in the case of stone it refers to the dimensions of thickness, breadth and length.