Ads
related to: synthetic oil test results
Search results
Results From The WOW.Com Content Network
Synthetic oil is a lubricant consisting of chemical compounds that are artificially modified or synthesised. Synthetic oil is used as a substitute for petroleum-refined oils when operating in extreme temperature, in metal stamping to provide environmental and other benefits, and to lubricate pendulum clocks .
In this test, a sample is heated at 250 °C for 60 minutes with a constant flow of air over it. The weight fraction lost is the result for the Noack volatility test. As the lighter hydrocarbon fraction of motor oils evaporate, the viscosity of the remaining oil increases, contributing to poor circulation, reduced fuel economy , increased oil ...
The peroxide value is defined as the amount of peroxide oxygen per 1 kilogram of fat or oil. Traditionally this was expressed in units of milliequivalents, although in SI units the appropriate option would be in millimoles per kilogram (N.B. 1 milliequivalents = 0.5 millimole; because 1 mEq of O2 =1 mmol/2 of O2 =0.5 mmol of O2, where 2 is valence).
The oil fails the test at a particular temperature if the oil is too viscous. The grade of the oil is that associated with the coldest temperature at which the oil passes the test. For example, if an oil passes at the specified temperatures for 10W and 5W, but fails at the 0W temperature, the oil is grade 5W. It cannot be labeled 0W or 10W.
Oil sampling is a procedure for collecting a volume of fluid from lubricated or hydraulic machinery for the purpose of oil analysis. Much like collecting forensic evidence at a crime scene, when collecting an oil sample, it is important to ensure that procedures are used to minimize disturbance of the sample during and after the sampling process.
So periodic oil and filter changes should still be done with synthetic oil, but some synthetic oil suppliers suggest that the intervals between oil changes can be longer, sometimes as long as 16,000–24,000 kilometres (9,900–14,900 mi) primarily due to reduced degradation by oxidation.
For two fluids with the same viscosity, the one that results in a smaller wear scar is considered to have higher lubricity. For this reason, lubricity is also termed a substance's anti-wear property. Examples of tribometer test setups include "Ball-on-cylinder" and "Ball-on-three-discs" tests.
Timken OK Load is a standardised measurement that indicates the possible performance of extreme pressure (EP) additives in a lubricating grease or oil. The units of measurement are pounds-force or kilograms-force. This measurement is performed using a special test machine and standard block and ring test specimens.
Ad
related to: synthetic oil test results