Ads
related to: proxxon rbs a 12 mm x 125 tap and die
Search results
Results From The WOW.Com Content Network
where is the tap drill size, is the major diameter of the tap (e.g., 10 mm for a M10×1.5 tap), and pitch is the pitch of the thread (1.5 mm in the case of a standard M10 tap) and so the correct drill size is 8.5 mm. This works for both fine and coarse pitches, and also produces an approximate 75% thread.
In addition, 10 mm (0.393 in), and letter X (0.397 in) will work well, although major minus pitch by itself does not tell you this; but the 90% ± 2 pp guideline supports it. For both of these rules of thumb (85%/90% and major minus pitch), the tap drill size yielded is not necessarily the only possible one, but it is a good one for general use.
Second-generation Chinese sabot round introduced in 1999. Initially 125-IIM acted as the export version with reduced velocity but with the introduction of DTC10-125, the DTW-125 itself became exported under the name “BTA4” Country of origin: China; Projectile dimension: 642 mm; Round weight: 21.36 kg; Projectile weight (without Sabot): 4.1kg
A minimum root-crest clearance of 0.01 in (0.25 mm) (diametral) between opposing threads with 10 tpi (threads-per-inch) or fewer, and 0.005 in (0.13 mm) for finer pitches. (This is also true for the minor diameters of the Centralizing Acme thread, though not its major diameters, where the allowance is made less than the PD allowance.)
This is a list of firearm cartridges which have bullets in the 12 millimetres (0.47 in) to 12.99 millimetres (0.511 in) caliber range.. Length refers to the cartridge case length.
The high penetration VKS round can penetrate up to 16 mm (0.63 in) of steel at 200 metres (220 yd) or body armor up to GOST 5 or NIJ III at 100 metres (110 yd). The accuracy of this cartridge when loaded with precision VKS bullets is claimed to be one MOA at 100 metres (110 yd) up to the effective range limit of 690 metres (750 yd).