Ads
related to: headphone volume control circuit
Search results
Results From The WOW.Com Content Network
Some headphone cords are equipped with a serial potentiometer for volume control. Wired headphones may be equipped with a non-detachable cable or a detachable auxiliary male-to-male plug, as well as some with two ports to allow connecting another wired headphone in a parallel circuit, which splits the audio signal to share with another ...
Most headphone amplifiers support a higher voltage output and therefore higher power (volume) levels. Whereas most portable electronics are powered by a 1.8, 2.5 or 3.3 Vpp supply, many headphone amplifiers use 10, 18 or 24 Vpp supplies, allowing 5-20 dB higher volume. [ 1 ]
A tone control circuit is an electronic circuit that consists of a network of filters which modify the signal before it is fed to speakers, headphones or recording devices by way of an amplifier. Tone controls are found on many sound systems: radios , portable music players , boomboxes , public address systems , and musical instrument amplifiers .
Connecting a low-impedance load such as a loudspeaker (usually 4 to 8 Ω) to a line out will essentially short circuit the output circuit. Such loads are around 1/1000 the impedance a line out is designed to drive, so the line out is usually not designed to source the current that would be drawn by a 4 to 8 ohm load at normal line out signal ...
Panning is the distribution of an audio signal (either monaural or stereophonic pairs) into a new stereo or multi-channel sound field determined by a pan control setting. A typical physical recording console has a pan control for each incoming source channel.
For loudness compensation to work correctly the playback system must also accurately assume what volume level was used in mastering. For movie soundtracks this reference volume level is an industry standard [ 4 ] and can be used by manufacturers to provide a loudness feature that works with a reasonable degree of accuracy.