Search results
Results From The WOW.Com Content Network
Sodium hydroxide, also known as lye and caustic soda, [1] [2] is an inorganic compound with the formula NaOH. It is a white solid ionic compound consisting of sodium cations Na + and hydroxide anions OH −. Sodium hydroxide is a highly corrosive base and alkali that decomposes lipids and proteins at ambient temperatures and may cause severe ...
Pellets of soda lye (sodium hydroxide) Pellets of potash lye (potassium hydroxide)Lye is a hydroxide, either sodium hydroxide or potassium hydroxide.The word lye most accurately refers to sodium hydroxide (NaOH), [citation needed] but historically has been conflated to include other alkali materials, most notably potassium hydroxide (KOH).
Caustic potash/caustic wood alkali – potassium hydroxide, formed by adding lime to potash. Caustic Soda/caustic marine alkali – sodium hydroxide, NaOH, formed by adding lime to natron. Caustic volatile alkali – ammonium hydroxide. Corrosive sublimate – mercuric chloride, formed by subliming mercury, calcined green vitriol, common salt ...
However, when mixed into water-based drilling fluids, hydrochloric acid only decreases the pH of the water to a more manageable level. Caustic (sodium hydroxide), anhydrous lime, soda ash, bentonite, baryte and polymers are the most common chemicals used in water-based drilling fluids.
Common sources of chemical burns include sulfuric acid (H 2 SO 4), hydrochloric acid (HCl), sodium hydroxide (NaOH), lime (CaO), silver nitrate (AgNO 3), and hydrogen peroxide (H 2 O 2). Effects depend on the substance; hydrogen peroxide removes a bleached layer of skin, while nitric acid causes a characteristic color change to yellow in the ...
The alkoxide ion is a strong base so the proton is transferred from the carboxylic acid to the alkoxide ion, creating an alcohol: saponification part III. In a classic laboratory procedure, the triglyceride trimyristin is obtained by extracting it from nutmeg with diethyl ether. Saponification to the soap sodium myristate takes place using NaOH ...
These tanks contain, in order, alkaline detergent, water, sodium hydroxide at 140.5 °C (284.9 °F) (the blackening compound), and finally the sealant, which is usually oil. The NaOH (caustic soda) and elevated temperature cause Fe 3 O 4 (black oxide) to form on the surface of the metal instead of Fe 2 O 3 (red oxide; rust). While it is ...
Similarly to the membrane cell, chloride ions are oxidized at the anode to produce chlorine, and at the cathode, water is split into caustic soda and hydrogen. The diaphragm prevents the reaction of the caustic soda with the chlorine. A diluted caustic brine leaves the cell. The caustic soda must usually be concentrated to 50% and the salt removed.