Ads
related to: bmx steering wheel forks
Search results
Results From The WOW.Com Content Network
Fork: a mechanical assembly that integrates a bicycle's frame to its front wheel and handlebars, allowing steering by virtue of its steerer tube; Fork crown: the point at which the two blades of the fork meet below the steerer tube. Fork end: paired slots on a fork or frame at which the axle of the wheel is attached. See also Dropout; Frame ...
The fork offset is the perpendicular distance from the steering axis to the center of the front wheel. In bicycles, fork offset is also called fork rake. Road racing bicycle forks have an offset of 40–50 mm (1.6–2.0 in). [7]
A bicycle dropout (drop out, frame end, or fork end), is a slot in a frame or fork where the axle of the wheel is attached. The term fork is sometimes also used to describe the part of a bicycle that holds the rear wheel, [1] which on 19th century ordinary or penny-farthing bicycles was also a bladed fork. On most modern bicycle designs the ...
Cargo bicycles with the cargo platform ahead of the rider have a low-set platform with a small diameter front wheel ahead of this. The conventional fork and steerer rise above this, often inconveniently for cargo loading. In 2011 Elian Cycles developed their cargo bicycle called "Cargobike" with hub-center steering to the wheel. [8]
A motorcycle fork connects a motorcycle's front wheel and axle to its frame, typically via a yoke, also known as a triple clamp, which consists of an upper yoke joined to a lower yoke via a steering stem, a shaft that runs through the steering head, creating the steering axis. Most forks incorporate the front suspension and front brake, and ...
The steering axis is the axis about which the entire steering mechanism (fork, handlebars, front wheel, etc.) pivots. In traditional bike designs, with a steering axis tilted back from the vertical, positive trail tends to steer the front wheel into the direction of a lean, independent of forward speed. [ 28 ]