Ads
related to: oil viscosity rating chart for tires walmart
Search results
Results From The WOW.Com Content Network
A 10W-30 oil must pass the SAE J300 viscosity grade requirements for both 10W and 30, and all limitations placed on the viscosity grades, such as the requirement that a 10W oil must fail the 5W requirements. Viscosity index improvers (VIIs) are special polymer additives added to oil, usually to improve cold weather performance in passenger ...
where U is the oil's kinematic viscosity at 40 °C (104 °F), Y is the oil's kinematic viscosity at 100 °C (212 °F), and L and H are the viscosities at 40 °C for two hypothetical oils of VI 0 and 100 respectively, having the same viscosity at 100 °C as the oil whose VI we are trying to determine.
SAE J306 is a standard that defines the viscometric properties of automotive gear oils.It is maintained by SAE International. [1] Key parameters for this standard are the kinematic viscosity of the gear oil, the maximum temperature at which the oil has a viscosity of 150,000 cP, and a measure of its shear stability through the KRL test.
Once the DN factor of a bearing has been obtained, it can be used to consult grease selection charts in order to determine the correct lubricant. Viscosity must be matched to the needs of the bearing in order to obtain maximum efficiency, and to avoid lubricant runout due to overheating, which is a consequence of metal-on-metal contact, as well ...
In line with car manufacturers push towards these lower viscosities in search of better fuel economy, in April 2013 the Society of Automotive Engineers (SAE) introduced an SAE 16 viscosity rating, a break from its traditional "divisible by 10" numbering system for its high-temperature viscosity ratings that spanned from low-viscosity SAE 20 to ...
For example, most modern gearboxes require a GL-4 oil, and separate differentials (where fitted) require a GL-5 oil. While they take the same form, the viscosity grades for gear oils are on a different scale than the viscosity grades for an engine oil. The viscometrics for gear oils are standardized in SAE J306.