Ad
related to: helical antenna gain chart for indoor theater events schedule free
Search results
Results From The WOW.Com Content Network
A helical antenna is an antenna consisting of one or more conducting wires wound in the form of a helix.A helical antenna made of one helical wire, the most common type, is called monofilar, while antennas with two or four wires in a helix are called bifilar, or quadrifilar, respectively.
When considering an antenna's directional pattern, gain with respect to a dipole does not imply a comparison of that antenna's gain in each direction to a dipole's gain in that direction. Rather, it is a comparison between the antenna's gain in each direction to the peak gain of the dipole (1.64). In any direction, therefore, such numbers are 2 ...
An antenna designer must take into account the application for the antenna when determining the gain. High-gain antennas have the advantage of longer range and better signal quality, but must be aimed carefully in a particular direction. Low-gain antennas have shorter range, but the orientation of the antenna is inconsequential.
A directive antenna with moderate gain of about 8 dBi often used at UHF frequencies. Consists of a dipole mounted in front of two reflective metal screens joined at an angle, usually 90°. Used as a rooftop UHF television antenna and for point-to-point data links. Parabolic The most widely used high gain antenna at microwave frequencies and above.
The output indicates that the antenna has a maximum gain of 9.75 dBi, a little over three times the gain of an isotropic antenna. However, as the signal moves even five degrees to the side, this has dropped to 9.5. When you reach 75 degrees off the front, the antenna begins to have negative gain.
In order to receive HRPT transmissions a high gain antenna is required, such as a small satellite dish, a helical antenna, or a crossed yagi. Basic reception equipment includes a parabolic dish antenna attached to an Azimuth-Elevation unit. The HRPT signal is further enhanced with a 1.7 GHz pre-amplifier.
Friis' original idea behind his transmission formula was to dispense with the usage of directivity or gain when describing antenna performance. In their place is the descriptor of antenna capture area as one of two important parts of the transmission formula that characterizes the behavior of a free-space radio circuit.
Omnidirectional radiation patterns are produced by the simplest practical antennas, monopole and dipole antennas, consisting of one or two straight rod conductors on a common axis. Antenna gain (G) is defined as antenna efficiency (e) multiplied by antenna directivity (D) which is expressed mathematically as: =.