Ads
related to: standard bike chain sizes comparison pdf
Search results
Results From The WOW.Com Content Network
The chain in use on modern bicycles has a 1 ⁄ 2 inch (12.7 mm) pitch, which is the distance from one pin center to another, ANSI standard #40, where the 4 in "#40" indicates the pitch of the chain in eighths of an inch; and ISO standard 606 (metric) #8, where the 8 indicates the pitch in sixteenths of an inch.
A bicycle gearbox with chain tensioner. Bicycle gearing is the aspect of a bicycle drivetrain that determines the relation between the cadence, the rate at which the rider pedals, and the rate at which the drive wheel turns. On some bicycles there is only one gear and, therefore, the gear ratio is fixed, but most modern bicycles have multiple ...
Bicycle drivetrain systems have been developed to transmit power from riders to drive wheels by a variety of methods. Most bicycle drivetrain systems incorporate a freewheel to allow coasting, but direct-drive and fixed-gear systems do not. The latter are sometimes also described as bicycle brake systems. A belt-drive crankset.
Crank length is measured from the center of the pedal spindle to the center of the bottom bracket spindle or axle. The larger bicycle component manufacturers typically offer crank lengths for adult riders from 165 to 180 mm (6.5 to 7.1 in) long in 2.5 mm (0.098 in) increments, with 170 mm (6.7 in) cranks being the most common size.
Double (Standard): These are intended to be used with cranksets having two chainrings. When viewed from the side of the bicycle, the inner and outer plates of the cage have roughly the same profile. Triple (Alpine): Derailleurs designed to be used with cranksets having three chainrings, or with two chainrings that differ greatly in size.
From a mechanical viewpoint, up to 99% of the mechanical energy delivered by the rider into the pedals is transmitted to the wheels (clean, lubricated new chain at 400 W), although the use of gearing mechanisms reduces this by 1–7% (clean, well-lubricated derailleurs and a straight chainline), 4–12% (chain with 3-speed hubs), or 10–20% (shaft drive with 3-speed hubs).