Ads
related to: displayport 1.2 vs dvi 3 channel dimensions chart size m57
Search results
Results From The WOW.Com Content Network
DisplayPort Dual-Mode (DP++), also called Dual-Mode DisplayPort, is a standard which allows DisplayPort sources to use simple passive adapters to connect to HDMI or DVI displays, and allows DisplayPort displays to use simple passive adapters to connect HDMI or DVI sources. Dual-mode is an optional feature, so not all DisplayPort sources ...
However, the maximum refresh rate will be limited by the number of DVI links connected to the monitor. 1, 2, or 4 DVI connectors are used to drive the monitor using various tile configurations. Only the IBM T221-DG5 and IDTech MD22292B5 support the use of dual-link DVI ports through an external converter box.
Five variants are: DVI-I single link, DVI-I dual link, DVI-D single link, DVI-D dual link, and DVI-A. Male Mini-DVI plug on top of a 12-inch PowerBook G4; female port is second from left. Mini-DVI: VGA, DVI, television. Apple Computer alternative to Mini-VGA. Often now replaced by Mini DisplayPort. Female Micro-DVI port (rightmost) on MacBook ...
Four times the resolution of 1080p. Requires a dual-link DVI, category 2 (high-speed) HDMI, DisplayPort or a single Thunderbolt link, and a reduced scan rate (up to 30 Hz); a DisplayPort 1.2 connection can support this resolution at 60 Hz, or 30 Hz in stereoscopic 3D. 3840×2160 (8,294k) 3840 2160 8,294,400 16:9 24 bpp DCI 4K
The data is transmitted via the cable connecting the display and the graphics card; VGA, DVI, DisplayPort and HDMI are supported. [ citation needed ] The EDID is often stored in the monitor in the firmware chip called serial EEPROM (electrically erasable programmable read-only memory) and is accessible via the I²C-bus at address 0x50 .
Display Data Channel (DDC) is a collection of protocols for digital communication between a computer display and a graphics adapter that enable the display to communicate its supported display modes to the adapter and that enable the computer host to adjust monitor parameters, such as brightness and contrast.