Ads
related to: lifting eye bolt capacitiesamazon.com has been visited by 1M+ users in the past month
Search results
Results From The WOW.Com Content Network
Eye bolts without a shoulder should not be used for angular loads. Heavy forged eye bolts with a continuous eye may be forged with an integral shoulder, allowing their use for heavy off-axis loads. Eye bolt with expansion anchor. Eye bolts are often installed into masonry and so versions that form their own anchor bolt are commonly available.
The first outer leg is inserted into the lewis hole, followed by the second outer leg. The inner (parallel) leg is inserted last, pushing the outer legs into contact with the inside of the lewis hole. The shackle is unbolted, placed over the legs, and the bolt fastened through both the shackle eyes and the eye in the top of each leg.
Lifting design is influenced by the steel / concrete interaction of the specific anchor selected. Different load cases are considered by the lifting design engineer, such as anchor susceptibility to edge distance, placement sensitivity, and anchor capacity at the specific concrete strength at time of lift.
An elevator bolt is a similar to a carriage bolt, except the head (or foot, depending on the application) is thin and flat. There are many variations. [11] Elevator bolts are designed to be used for leveling appliances or furniture. eye bolt: An eye bolt is a bolt with a looped head.
Welded eye shallow cranked eye bolt in profile. The requirement for an offset tie down will occur when vermin proofing must be placed between the column or post, and a wooden bearer, for example to stop termites travelling up through a concrete or wooden post or column directly into the bearer and the rest of the building.
Lifting inserts: used for lifting operations of plain or prestressed RC beams. The insert can be a threaded rod. See also bolt (climbing). Anchor channels: used in precast concrete connections. [8] The channel can be a hot-rolled or a cold-formed steel shape in which a T-shape screw is placed in order to transfer the load to the base material.