Search results
Results From The WOW.Com Content Network
Automated manual transmissions can be semi-automatic or fully-automatic in operation. Several different systems to automate the clutch and/or shifting have been used over the years, but they will generally use one of the following methods of actuation for the clutch and/or shifting: hydraulic or electro-hydraulic actuation, [12] electro-mechanical, [13] pneumatic, [6] [14] [15] electromagnetic ...
The speed of the gear change depends on the engine revs. If the engine has more than 5000 rpm and the throttle is pressed more than 60%, the change is faster. The system also has a rev limiter to avoid over-revving (in GTA models this behavior is removed). Downshift is accompanied by automatic rev-matching.
Honda semi-automatic still fonction with planetary gearbox (being manually controlled doesn't mean that it should be built like a manual transmission), only that it is the driver that controls bands and clutches to achieve gear change. They should not cost more than a regular automatic transmission, and at the best they are maybe easier to build.
An automated manual transmission (AMT) is essentially a conventional manual transmission that uses automatic actuation to operate the clutch and/or shift between gears. Many early versions of these transmissions were semi-automatic in operation, such as Autostick , which automatically control only the clutch , but still require the driver's ...
[44] [45] [46] Another early example of this transmission system was introduced in the 1955 Citroën DS, which used a 4-speed BVH transmission. This semi-automatic transmission used an automated clutch, which was actuated using hydraulics. Gear selection also used hydraulics, however, the gear ratio needs to be manually selected by the driver.
Manual shifting is allowed with the gear stick in the manual mode. The gear stick can also be used just like any other automatic gearbox, where the transmission will shift automatically. Geartronic is offered on Volvo vehicles with engine displacements of 2.0 liters or greater. Geartronic transmissions are manufactured in Japan by Aisin AW.
Aisin and Toyota offer various 8-speed automatic transmissions for use in both longitudinal [a] [1] and transverse [b] [2] engine vehicles, based on a common, globally patented gearset concept. [a] [1] [b] [2] The Aisin TL-80SN (Toyota AA 80E/AA 80F/AA 81E) series is the world's first 8-speed automatic transmission for passenger cars. [3]
The hydraulic control system consists of a valve arrangement and an engine driven pump. The automatic transmission contains a planetary gear set consisting of two sun gears, two sets of three planet pinions contained within a planetary carrier and ring gear. Various speed ratios are obtained by holding or clutching various combinations of ...