Ads
related to: electric automatic door closers commercial
Search results
Results From The WOW.Com Content Network
Door closers at this time were known as a door spring and check. Later these two devices were combined into one unit that both closed the door and slowed the speed at which this was done. These early "door closers" used a pneumatic piston to check the speed, later models used a hydraulic or oil filled device for the same effect.
Swing side, door mounted sensor—mounted on the swing side of the door itself, used as the door is opening to detect a user in the way of the opening door. In that case, the operator stops the door. The sensitivity of infrared sensors must be reduced at the end of the opening angle, if it starts seeing a wall next to the door, so it may not ...
The door holders release, allowing the doors to close automatically using door closers. [1] [2] The electric power to keep the doors open is typically 12 VDC, 24 VDC (common), 24 VAC, 120 VAC, or 240 VAC. The closed doors may or may not mechanically latch or lock in the closed position.
The operator is placed in the space above the sliding door. An electric motor, geared down to get a lower speed and a higher torque, drives a pulley at one end of a belt. The door is clamped to the belt. To open the door, the motor turns the pulley, which in turn turns the belt, which in turn drags the door. To close the door, the reverse occurs.
In electric power distribution, automatic circuit reclosers (ACRs) are a class of switchgear designed for use on overhead electricity distribution networks to detect and interrupt transient faults. Also known as reclosers or autoreclosers , ACRs are essentially rated circuit breakers with integrated current and voltage sensors and a protection ...
The AOL.com video experience serves up the best video content from AOL and around the web, curating informative and entertaining snackable videos.