Search results
Results From The WOW.Com Content Network
Activated sludge tank at Beckton sewage treatment plant, UK.The white bubbles are due to the diffused air aeration system. The activated sludge process is a type of biological wastewater treatment process for treating sewage or industrial wastewaters using aeration and a biological floc composed of bacteria and protozoa.
Sewage treatment plants (STP) based on activated sludge often cover large surface areas, necessitated mainly by the large settling tanks. To build compact STP's, biomass can be grown as biofilms on a carrier material, or as fast settling aerobic granular sludge without a carrier. Recent research showed the advantages of a discontinuously fed ...
Aerobic digestion is typically used in an activated sludge treatment plant. Waste activated sludge and primary sludge are combined, where appropriate, and passed to a thickener where the solids content is increased. This substantially reduces the volume that is required to be treated in the digester.
Sewage sludge treatment is the process of removing contaminants from wastewater.Sewage sludge is produced from the treatment of wastewater in sewage treatment plants and consists of two basic forms — raw primary sludge and secondary sludge, also known as activated sludge in the case of the activated sludge process.
A generalized schematic of an activated sludge process. Activated sludge is a common suspended-growth method of secondary treatment. Activated sludge plants encompass a variety of mechanisms and processes using dissolved oxygen to promote growth of biological floc that substantially removes organic material.
For activated sludge treatment plants in the United States, around 30 percent of the annual operating costs is usually required for energy. [7]: 1703 Most of this electricity is used for aeration, pumping systems and equipment for the dewatering and drying of sewage sludge. Advanced sewage treatment plants, e.g. for nutrient removal, require ...
As the bacteria multiply and die, the sludge within the tank increases over time and a waste activated sludge (WAS) pump removes some of the sludge during the settling stage to a digester for further treatment. The quantity or “age” of sludge within the tank is closely monitored, as this can have a marked effect on the treatment process.
Extended aeration agitates all incoming waste in the sludge from a single clarifier. The combined sludge starts with a higher concentration of inert solids than typical secondary sludge and the longer mixing time required for digestion of primary solids in addition to dissolved organics produces aged sludge requiring greater mixing energy input per unit of waste oxidized.