Ads
related to: frost wall for concrete slab
Search results
Results From The WOW.Com Content Network
Frost damage can occur as cracks, stone splinters and swelling of the material. When water freezes, the volume of water increases by 9 %. [ citation needed ] When the volumetric moisture content exceeds 91 %, then the volume increase of water in the pores of the material caused by freezing cannot be absorbed by sufficient empty pores.
A steel-reinforced concrete grade beam may be poured at the surface to provide ground clearance for the structure. If an insulated slab is to be poured inside the grade beam, then the outer surface of the grade beam and the rubble trench should be insulated with rigid XPS foam board, which must be protected above grade from mechanical and UV ...
Another common type of shallow foundation is the slab-on-grade foundation where the weight of the structure is transferred to the soil through a concrete slab placed at the surface. Slab-on-grade foundations can be reinforced mat slabs, which range from 25 cm to several meters thick, depending on the size of the building, or post-tensioned ...
Elevated structural slabs are generally only found on custom homes or homes with basements. Copper piping, commonly used to carry natural gas and water, reacts with concrete over a long period, slowly degrading until the pipe fails. This can lead to what is commonly referred to as slab leaks. These occur when pipes begin to leak from within the ...
Light-frame buildings in areas with shallow or nonexistent frost depths are often erected on monolithic concrete-slab foundations that serve both as a floor and as a support for the structure. Other light-frame buildings are built over a crawlspace or a basement , with wood or steel joists used to span between foundation walls, usually ...
The steel shuttering pinches the top surface of a concrete slab due to the weight of the next slab being constructed. Concrete slabs, block walls and pipelines are susceptible to cracking during ground settlement, seismic tremors or other sources of vibration, and also from expansion and contraction during adverse temperature changes.