When.com Web Search

  1. Ads

    related to: 80000 gpd to gpm pump oil equivalent formula for water heater system

Search results

  1. Results From The WOW.Com Content Network
  2. Total dynamic head - Wikipedia

    en.wikipedia.org/wiki/Total_dynamic_head

    In fluid dynamics, total dynamic head (TDH) is the work to be done by a pump, per unit weight, per unit volume of fluid.TDH is the total amount of system pressure, measured in feet, where water can flow through a system before gravity takes over, and is essential for pump specification.

  3. Thermic fluid heater - Wikipedia

    en.wikipedia.org/wiki/Thermic_fluid_heater

    A thermic fluid heater (TFH), [1] also known as a thermal oil heater, is a device used for indirect heat transfer through a thermic fluid. It heats the fluid to a desired temperature and then transfers that heat to various processes without any direct contact between the heating source and the product.

  4. Thermal efficiency - Wikipedia

    en.wikipedia.org/wiki/Thermal_efficiency

    Since the cycle's working fluid, water, changes from liquid to vapor and back during the cycle, their efficiencies depend on the thermodynamic properties of water. The thermal efficiency of modern steam turbine plants with reheat cycles can reach 47%, and in combined cycle plants, in which a steam turbine is powered by exhaust heat from a gas ...

  5. Water heating - Wikipedia

    en.wikipedia.org/wiki/Water_heating

    An 80 US gal (300 L; 67 imp gal) electric storage tank water heater was able to have a minimum energy factor of 86% under the pre-2015 standard, while under the 2015 standard, the minimum energy factor for an 80-gallon electric storage tank water heater is now 197%, which is only possible with heat pump technology. This rating measures ...

  6. Fixture unit - Wikipedia

    en.wikipedia.org/wiki/Fixture_unit

    The relationship between gallons per minute (gpm) and fixture unit is not constant, but varies with the number of fixture units. For example, 1000 FU is equivalent to 220 US gallons per minute (0.014 m 3 /s) while 2000 FU represents only 330 US gallons per minute (0.021 m 3 /s), about 1.5 times the flow rate.

  7. Heat-transfer fluid - Wikipedia

    en.wikipedia.org/wiki/Heat-transfer_fluid

    Water is the most common heat transfer fluid because of its economy, high heat capacity and favorable transport properties. However, the useful temperature range is restricted by freezing below 0 °C and boiling at elevated temperatures depending on the system pressure. Antifreeze additives can alleviate the freezing problem to some extent ...