Ads
related to: fire alarm control panel location
Search results
Results From The WOW.Com Content Network
Coded panels were the earliest type of central fire alarm control, and were made during the 1800s to the 1970s. A coded panel is similar in many ways to a modern conventional panel (described below), except each zone was connected to its own code wheel, which, depending on the way the panel was set up, would either do sets of four rounds of code until the initiating pull station was reset ...
In its simplest form, the user activates the alarm by pulling the handle down, which completes a circuit and locks the handle in the activated position, sending an alarm to the fire alarm control panel. After operation, most fire alarm pull stations must be restored to the ready position using a special tool or key for the panel to be reset.
A fire alarm annunciator panel is located where it is accessible to fire-fighting crews, such as at building entrances/exits. The annunciator panel will indicate the system status using lamps (or LEDs), an audible warning tone, and depending on the system technology, the exact location or approximate physical location of the source of a fire ...
A fire alarm control panel Fire alarm speaker and pull station. Fire alarm systems are composed of several distinct parts: Fire alarm control panel (FACP), or fire alarm control unit (FACU): This component, the hub of the system, monitors inputs and system integrity, controls outputs, and transmits information.
The standard fire alarm sound used in most of North America. Coding refers to the pattern or tones a notification appliance sounds in and is controlled either by the panel or by setting jumpers or DIP switches on the notification appliances. The majority of audible notification appliances installed prior to 1996 produced a steady sound for ...
Fire-Lite was the first company to introduce a compact, inexpensive addressable fire alarm control panel. [2] Some of their recognizable products include the Fire-Lite BG-10 pull station, introduced in 1983, and the newer BG-12 pull station, introduced in 1999. Fire-Lite is part of the Honeywell Life Safety Group, along with Notifier.
In a conventional system, smoke detectors are typically wired together in each zone and a single fire alarm control panel usually monitors several zones which can be arranged to correspond to different areas of a building. [56] In the event of a fire, the control panel can identify which zone or zones contain the detector or detectors in alarm.
Introduction: the introduction to the series of standards contains a diagram of a fire alarm system as well as numerous definitions of terms that are used in the other parts of the series of standards. Product group control panels and power supply: These parts of EN 54 concern fire alarm control panels, voice alarm control panels and power ...