Search results
Results From The WOW.Com Content Network
Networks receive packets from other networks. Normally a packet will contain the IP address of the computer that originally sent it. This allows devices in the receiving network to know where it came from, allowing a reply to be routed back (amongst other things), except when IP addresses are used through a proxy or a spoofed IP address, which does not pinpoint a specific user within that pool ...
Martian packets commonly arise from IP address spoofing in denial-of-service attacks, [2] but can also arise from network equipment malfunction or misconfiguration of a host. [ 1 ] In Linux terminology, a Martian packet is an IP packet received by the kernel on a specific interface, while routing tables indicate that the source IP is expected ...
IP-in-IP IP in IP (encapsulation) RFC 2003: 0x05 5 ST Internet Stream Protocol: RFC 1190, RFC 1819: 0x06 6 TCP Transmission Control Protocol: RFC 793: 0x07 7 CBT Core-based trees: RFC 2189: 0x08 8 EGP Exterior Gateway Protocol: RFC 888: 0x09 9 IGP Interior gateway protocol (any private interior gateway, for example Cisco's IGRP) 0x0A 10 BBN-RCC-MON
Corporate networks also typically have a limited number of internal address blocks in use. An edge device at the boundary between the internal corporate network and external networks (such as the Internet) is used to perform egress checks against packets leaving the internal network, verifying that the source IP address in all outbound packets ...
Unix-like operating systems commonly implement IP address blocking using a TCP wrapper, configured by host access control files /etc/hosts.deny and /etc/hosts.allow.. Both companies and schools offering remote user access use Linux programs such as DenyHosts or Fail2ban for protection from unauthorized access while allowing permitted remote access.
ECN allows end-to-end notification of network congestion without dropping packets. ECN is an optional feature that may be used between two ECN-enabled endpoints when the underlying network infrastructure also supports it. Conventionally, TCP/IP networks signal congestion by dropping packets.
Loose Source Routing is an IP option which can be used for address translation. LSR is also used to implement mobility in IP networks. [3] Loose source routing uses a source routing option in IP to record the set of routers a packet must visit. The destination of the packet is replaced with the next router the packet must visit.
Other packets in the same physical buffer destined to different (non-congested) output ports are in separate virtual queues and can therefore still be processed. In a traditional setup, the blocked packet for the congested egress port would have blocked the whole physical buffer, resulting in head-of-line blocking.