Ads
related to: fire extinguisher pressure
Search results
Results From The WOW.Com Content Network
The powder also works to interrupt the chemical reaction of fire, so these extinguishers are extremely effective at putting out the fire. Pressure is generated by gas cartridges stored inside the cylinder. Its force will last for 45 seconds and can reach 3–4.5 metres (10–15 ft). [3] [1]
The servicer places a tag on the extinguisher to indicate the type of service performed (annual inspection, recharge, new fire extinguisher). Hydrostatic pressure testing for all types of extinguishers is also required, generally every five years for water and CO 2 models up to every 12 years for dry chemical models.
A standard APW extinguisher in the United States contains 9.5 litres (2.5 US gal) of water in a stainless steel tank. The water is discharged by means of a 13 mm (1 ⁄ 2 in) hose, with a smooth-bore nozzle attached to the tip. They will initially produce a 12–15 m (40–50 ft) stream of water, with a discharge time of about 50 seconds.
Indoor fire hose with a fire extinguisher. A fire hose (or firehose) is a high-pressure hose that carries water or other fire retardant (such as foam) to a fire to extinguish it. Outdoors, it attaches either to a fire engine, fire hydrant, or a portable fire pump.
CO 2 extinguisher Fire extinguisher that releases carbon dioxide gas to displace oxygen to smother and cool a fire, such as a flammable liquid. Combination nozzle A low pressure fog nozzle (usually 120 to 150 lbf/in² or 820 to 1030 kPa that can be adjusted to produce a near straight stream. Also commonly referred to as a Taskforce tip (TFT).
Gaseous fire suppression, also called clean agent fire suppression, is the use of inert gases and chemical agents to extinguish a fire. These agents are governed by the National Fire Protection Association (NFPA) Standard for Clean Agent Fire Extinguishing Systems – NFPA 2001 in the US, with different standards and regulations elsewhere.