Search results
Results From The WOW.Com Content Network
The antenna consists of a wire suspended above the ground in the shape of a rhombus, terminated at one end by a resistor equal the the wire's characteristic impedance, about 400 to 600 ohms, and at the other end connected to the feedline to the receiver. The rhombic is a travelling wave antenna, Each segment of the rhombus has a radiation ...
Small rhombic UHF television antenna from 1952. Its broad bandwidth allowed it to cover the 470 to 890 MHz UHF television band. A rhombic antenna is made of four sections of wire suspended parallel to the ground in a diamond or "rhombus" shape. Each of the four sides is the same length – about a quarter-wavelength to one wavelength per ...
the upper half of a vertical full-wavelength loop antenna mounted on the ground (not to be confused with the visually similar but electrically different half-square antenna described below, under array antennas, [r] nor to be confused with the halo antenna, described next). The full loop is cut at two opposite points along its perimeter, and ...
The antenna can have a smaller or larger number of rod elements; in general, the more elements, the higher the gain and the more directional. Another design used mainly for UHF reception is the reflective array antenna, consisting of a vertical metal screen with multiple dipole elements mounted in front of it.
The radiation patterns of a vertical half-wave dipole, an omnidirectional antenna. The horizontal and vertical polar patterns are projections of the 3 dimensional pattern onto horizontal and vertical planes, respectively. An omnidirectional antenna radiates equal signal strength in all horizontal directions, so its horizontal pattern is just a ...
Simulating the end-fed half-wave (EFHW) dipole antenna; VK3IL - Multiband end-fed 80-10m antenna - NEC2 model file of a "MyAntennas EFHW-8010" multi-band antenna. Other retail books (such as The ARRL Antenna Book, Marcel De Canck's Advanced Antenna Modeling, and others) also include antenna model files. Most free or retail NEC software packages ...
The antenna's main lobe, its direction of greatest sensitivity, is to the right, off the end of the wire that is terminated in the resistor. The Beverage antenna consists of a horizontal wire one-half to several wavelengths long, suspended close to the ground, usually 3 to 6 m (10 to 20 feet) high, pointed in the direction of the signal source.
The coaxial collinear (COCO) antenna uses transposed coaxial sections to produce in-phase half-wavelength radiators. [5] A Franklin array uses short U-shaped half-wavelength sections whose radiation cancels in the far-field to bring each half-wavelength dipole section into equal phase. Another type is the omnidirectional microstrip antenna (OMA ...