Search results
Results From The WOW.Com Content Network
English: The cooling curve and phase diagram of an alloy; in this case a copper/nickel alloy. Based on a diagram from Degarmo, E. Paul; Black, J T.; Kohser, Ronald A. (2003), Materials and Processes in Manufacturing (9th ed.), Wiley, ISBN 0-471-65653-4 .
Copper alloys are widely used in the production of coinage; seen here are two examples – post-1964 American dimes, which are composed of the alloy cupronickel [55] and a pre-1968 Canadian dime, which is composed of an alloy of 80 percent silver and 20 percent copper.
Example of a copper alloy object: a Neo-Sumerian foundation figure of Gudea, circa 2100 BC, made in the lost-wax cast method, overall: 17.5 x 4.5 x 7.3 cm, probably from modern-day Iraq, now in the Cleveland Museum of Art (Cleveland, Ohio, USA) Copper alloys are metal alloys that have copper as their principal component.
Cupronickel or copper–nickel (CuNi) is an alloy of copper with nickel, usually along with small quantities of other metals added for strength, such as iron and manganese. The copper content typically varies from 60 to 90 percent. (Monel is a nickel–copper alloy that contains a minimum of 52 percent nickel.)
The name is mainly used in pop-science to describe all Al-Cu alloys system. Aluminium–copper alloys were standardised in the 2000 series by the international alloy designation system (IADS) which was originally created in 1970 by the Aluminum Association. 2000s series includes 2014 and 2024 alloys used in airframe fabrication.
Gamma prime (γ'): This phase constitutes the precipitate used to strengthen the alloy. It is an intermetallic phase based on Ni 3 (Ti,Al) which have an ordered FCC L1 2 structure. [10] The γ' phase is coherent with the matrix of the superalloy having a lattice parameter that varies by around 0.5%.
The dispersion of the second phase can be achieved also with castable alloys (e.g., copper) with a low-melting-point metal insoluble in copper, such as bismuth, 1–5% lithium, or up to 50% (usually 15–30%) lead; the size of inclusions can be adjusted by thermal treatment. Non-homogeneous distribution of the inclusions can also be achieved.
The two most prevalent shape-memory alloys are copper-aluminium-nickel and nickel-titanium (), but SMAs can also be created by alloying zinc, copper, gold and iron.Although iron-based and copper-based SMAs, such as Fe-Mn-Si, Cu-Zn-Al and Cu-Al-Ni, are commercially available and cheaper than NiTi, NiTi-based SMAs are preferable for most applications due to their stability and practicability [1 ...