Search results
Results From The WOW.Com Content Network
In the 220-configuration it produces 143 kW (194 PS; 192 hp) at 3,800 rpm with peak torque of 400 N⋅m (295 lbf⋅ft) at 1,600-2,400 rpm. The engine weight is 168.4 kg (371 lb) (a 17% improvement over the 202.8 kg (447 lb) of the previous 2.1 litres (2,143 cc) OM651). [4] [5] Also, the engine consumes 13% less fuel than its predecessor. It is ...
The engine is the largest reciprocating engine in the world. The 14-cylinder version first entered commercial service in September 2006 aboard the Emma Mærsk . The design is similar to the older RTA96C engine, but with common rail technology (in place of traditional camshaft , chain gear , fuel pump and hydraulic actuator systems).
The Honda K-series engine is a line of four-cylinder four-stroke car engines introduced in 2001. The K-series engines are equipped with DOHC valvetrains and use roller rockers on the cylinder head to reduce friction. The engines use a coil-on-plug, distributorless ignition system with a coil for each spark plug. This system forgoes the use of a ...
The 2.5-litre 6G73 is a 24-valve SOHC design with two valves running off a single cam lobe on the exhaust valves using a forked rocker arm and each intake valve actuated with two cam lobes, with a smaller bore than the 3.0L version of the same block. Bore and stroke are 83.5 mm × 76 mm (3.29 in × 2.99 in); it is a 60-degree V6 and weighs ...
As with the 1.9, the water pump is driven by the timing belt. Like the 1.9 L, this engine is a non-interference design. It is the last CVH engine made, and production ended with the 2004 Ford Focus LX/SE sedan and wagons. These engines have "2.0L Split Port" in raised letters on the top of the valve cover. Applications 1997–2002 Ford Escort
This design was patented for Fiat and was used in the engines of the 128 and 130, and even the Ferrari/Fiat Dino V6 engine was converted to this system. Fiat was a pioneer in engine development during the time period, using toothed rubber belt driven camshafts and aluminium alloy heads. Earlier Fiat Twin Cam engines were actually O.S.C.A. designs.
The wasserboxer was available in two displacements — 1.9-litres [1] and 2.1-litres. [1] Both engines have the same cylinder bore, but the 2.1-litre has a longer stroke. [1] Some wasserboxers suffered from water jacket gasket failures, often erroneously referred to as head gaskets.
The 2.0 L (1,986 cc) 107 kW (145 PS) B19ET was sold in certain markets where engines of over 2–litre displacement were heavily taxed, such as Italy. The engine has the same stroke as all other redblocks, the smaller displacement is the result of a smaller bore at 88.9 mm × 80 mm (3.50 in × 3.15 in).