Search results
Results From The WOW.Com Content Network
The first blower door was further used to test the airtightness of the Saskatchewan Conservation House built in 1977, which was tested at 0.5 ach at 50 Pa. These early research efforts demonstrated the potential power of blower door testing in revealing otherwise unaccounted for energy losses in homes.
A third test method to determine if ductwork is leaking to the outside is to use a pressure pan, which is a register cover with a pressure tap for a hose connection. With the house pressurized (or depressurized) to 50 Pa (-50 Pa) using a blower door, a pressure gauge is attached to the pressure pan by means of a hose.
The most common technique to measure airtightness is the fan pressurization method, also known as the blower door test. It is measured by the number of air changes per hour (ACH) that occur when there is a differential pressure of 50 pascals between outside and inside the building.
A blower door test can be used to test the quality of the air sealing of the building envelope. Smoke pencils can be used to detect gaps and caulking and weather-stripping can be used to improve air sealing. [10]
Electrical equipment; Access doors and other wall penetrations; Vertical section of a typical building with identification of potential leakage junctions. Common leakage sites are listed in the Figure and explained below: Junction lower floor / vertical wall; Junction window sill / vertical wall; Junction window lintel / vertical wall
Main page; Contents; Current events; Random article; About Wikipedia; Contact us
In 2002, Aeroflex acquired IFR Systems Inc, a test equipment manufacturer from Wichita, Kansas, originally founded in 1937. [6] In 1998, IFR previously acquired Marconi Instruments, a British test equipment manufacturer. [7] In 2007, Aeroflex was taken private by a group of private equity firms including Veritas Capital, Golden Gate Capital, GS ...
Automatic test equipment diagnostics is the part of an ATE test that determines the faulty components. ATE tests perform two basic functions. The first is to test whether or not the Device Under Test is working correctly. The second is when the DUT is not working correctly, to diagnose the reason.