Ads
related to: rainwater harvesting system cistern water tank
Search results
Results From The WOW.Com Content Network
The water needs of the town were met by the innumerable tanks in and around Bikaner, together with the wells and taankas that each house traditionally built for harvesting rainwater from the roof tops. The water from the taankas was used only for drinking purposes. If in any year there was less than normal rainfall and the taankas did not get ...
configuration of domestic rainwater harvesting system in Uganda. [1]Rainwater harvesting (RWH) is the collection and storage of rain, rather than allowing it to run off.. Rainwater is collected from a roof-like surface and redirected to a tank, cistern, deep pit (well, shaft, or borehole), aquifer, or a reservoir with percolation, so that it seeps down and restores the ground w
A rainwater catchment or collection (also known as "rainwater harvesting") system can yield 1,000 litres (260 US gal) of water from 1 cm (0.4 in) of rain on a 100 m 2 (1,100 sq ft) roof. Rainwater tanks are installed to make use of rain water for later use, reduce mains water use for economic or environmental reasons, and aid self-sufficiency.
There were two types: the tank cistern and the filter cistern. Such a filter cistern was built at the Riegersburg in Austrian Styria, where a cistern was hewn out of the lava rock. Rain water passed through a sand filter and collected in the cistern. The filter cleaned the rain water and enriched it with minerals. [citation needed]
A vortex filter is a filter used in rainwater harvesting systems to separate medium to large sized debris from the flow of water before the water flows into a tank, cistern or reservoir. by directing the flow around the inside of the wall of the filter housing. Any material with a density greater than water is pushed to the outside and allows ...
The diverted first flush water is used for irrigation or other purposes in a fashion similar to greywater. [12] Although many commercial versions are available, these devices are frequently constructed of spare pipe when the cistern is initially installed or thereafter. See Texas Manual on Rainwater Harvesting for calculations on sizing. [13]