Search results
Results From The WOW.Com Content Network
The distance resolution reachable with a linear frequency modulation of a pulse on a bandwidth is: 2 Δ f where is the speed of the wave. Definition. Ratio T T ′ = T Δ f {\textstyle {\frac {T} {T'}}=T\Delta f} is the pulse compression ratio. It is generally greater than 1 (usually, its value is 20 to 30).
Chirp compression. The chirp pulse compression process transforms a long duration frequency-coded pulse into a narrow pulse of greatly increased amplitude. It is a technique used in radar and sonar systems because it is a method whereby a narrow pulse with high peak power can be derived from a long duration pulse with low peak power.
Chirp. A chirp is a signal in which the frequency increases (up-chirp) or decreases (down-chirp) with time. In some sources, the term chirp is used interchangeably with sweep signal. [1] It is commonly applied to sonar, radar, and laser systems, and to other applications, such as in spread-spectrum communications (see chirp spread spectrum ...
A pulse-Doppler radar is a radar system that determines the range to a target using pulse-timing techniques, and uses the Doppler effect of the returned signal to determine the target object's velocity. It combines the features of pulse radars and continuous-wave radars, which were formerly separate due to the complexity of the electronics.
The pulse width ( ) (or pulse duration) of the transmitted signal is the time, typically in microseconds, each pulse lasts. If the pulse is not a perfect square wave, the time is typically measured between the 50% power levels of the rising and falling edges of the pulse. The pulse width must be long enough to ensure that the radar emits ...
Continuous-wave radar (CW radar) is a type of radar system where a known stable frequency continuous wave radio energy is transmitted and then received from any reflecting objects. [1] Individual objects can be detected using the Doppler effect , which causes the received signal to have a different frequency from the transmitted signal ...
Synthetic-aperture radar (SAR) is a form of radar that is used to create two-dimensional images or three-dimensional reconstructions of objects, such as landscapes. [1] SAR uses the motion of the radar antenna over a target region to provide finer spatial resolution than conventional stationary beam-scanning radars.
The Fresnel ripples on a chirp spectrum are very obtrusive, especially when time-bandwidth products are low (under 50, say) and their presence leads to high time sidelobe levels when chirps are subject to pulse compression as in radar and sonar systems. They arise because of the sudden discontinuities in the chirp waveform at the commencement ...