Search results
Results From The WOW.Com Content Network
The resolution of 960H depends on whether the equipment is PAL or NTSC based: 960H represents 960 x 576 (PAL) or 960 x 480 (NTSC) pixels. [29] 960H represents an increase in pixels of some 30% over standard D1 resolution, which is 720 x 576 pixels (PAL), or 720 x 480 pixels (NTSC). The increased resolution over D1 comes as a result of a longer ...
1080p progressive scan HDTV, which uses a 16:9 ratio. Some commentators also use display resolution to indicate a range of input formats that the display's input electronics will accept and often include formats greater than the screen's native grid size even though they have to be down-scaled to match the screen's parameters (e.g. accepting a 1920 × 1080 input on a display with a native 1366 ...
The resolution 3840 × 2160, sometimes referred to as 4K UHD or 4K × 2K, has a 16:9 aspect ratio and 8,294,400 pixels. It is double the size of Full HD (1920 × 1080) in both dimensions for a total of four times as many pixels, and triple the size of HD (1280 × 720) in both dimensions for a total of nine times as many pixels. It is the lowest ...
The following is a comparison of high-definition smartphone displays, containing information about their specific screen technology, resolution, size and pixel density.It is divided into three categories, containing smartphones with 720p, 1080p and 1440p displays.
The second-generation Macintosh, launched in 1987, came with colour (and greyscale) capability as standard, at two levels, depending on monitor size—512×384 (1/4 of the later XGA standard) on a 12" (4:3) colour or greyscale (monochrome) monitor; 640×480 with a larger (13" or 14") high-resolution monitor (superficially similar to VGA, but at ...
This table illustrates total horizontal and vertical detail via box size. It does not accurately reflect the screen shape (aspect ratio) of these formats, which is always stretched or squeezed to 4:3 or 16:9. Note that this chart illustrates visible resolution, not pixel count, which is why the 1080i box is not as tall as the 1080p box.
The display aspect ratio (DAR) is calculated from the physical width and height of a display, measured each in inch or cm (Display size). The pixel aspect ratio (PAR) is calculated from the width and height of one pixel. The storage aspect ratio (SAR) is calculated from the numbers of pixels in width and height stated in the display resolution.
The apparent PPI of a monitor depends upon the screen resolution (that is, the number of pixels) and the size of the screen in use; a monitor in 800×600 mode has a lower PPI than does the same monitor in a 1024×768 or 1280×960 mode.