Search results
Results From The WOW.Com Content Network
Upon completion of each ALU operation, the ALU's status output signals are usually stored in external registers to make them available for future ALU operations (e.g., to implement multiple-precision arithmetic) and for controlling conditional branching. The bit registers that store the status output signals are often collectively treated as a ...
The 74S181 4-bit ALU bitslice resting on a page from the datasheet. The 74181 is a 4-bit slice arithmetic logic unit (ALU), implemented as a 7400 series TTL integrated circuit. Introduced by Texas Instruments in February 1970, [1] it was the first complete ALU on a single chip. [2]
A larger data path can be made by joining more than one data paths using multiplexers. A data path is the ALU, the set of registers, and the CPU's internal bus(es) that allow data to flow between them. [2] A microarchitecture data path organized around a single bus. The simplest design for a CPU uses one common internal bus.
The IBM System/360 has a 32-bit architecture with 16 general-purpose registers, but most of the System/360 implementations use hardware that implements a much simpler underlying microarchitecture; for example, the System/360 Model 30 has 8-bit data paths to the arithmetic logic unit (ALU) and main memory and implemented the general-purpose ...
Remote laboratory (also known as online laboratory or remote workbench) is the use of telecommunications to remotely conduct real (as opposed to virtual) experiments, at the physical location of the operating technology, whilst the scientist is utilizing technology from a separate geographical location.
It can however in theory also be used to implement unary operations, such as logical shift left, in cases where limited by a fixed amount (e.g. for address generation unit). One way to implement a barrel shifter is as a sequence of multiplexers where the output of one multiplexer is connected to the input of the next multiplexer in a way that ...
This means that a test and branch is normally performed with two instructions; the first is an ALU instruction that sets the condition codes, followed by a branch instruction that examines one of those flags. The SPARC does not have specialized test instructions; tests are performed using normal ALU instructions with the destination set to %G0.
Adders are a part of the core of an arithmetic logic unit (ALU). The control unit decides which operations an ALU should perform (based on the op code being executed) and sets the ALU operation. The D input to the adder–subtractor above would be one such control line from the control unit.