Search results
Results From The WOW.Com Content Network
Thermoplastic olefin, thermoplastic polyolefin (TPO), ... [2] TPO is used extensively in ... TPO cannot be blown, or sustain a film thickness less than 1/4 mil (about ...
An alpha-olefin (or α-olefin) is an alkene where the carbon-carbon double bond starts at the α-carbon atom, i.e. the double bond is between the #1 and #2 carbons in the molecule. Alpha-olefins such as 1-hexene may be used as co-monomers to give an alkyl branched polymer (see chemical structure below), although 1-decene is most commonly used ...
Thermoplastic olefins (TPO) are increasingly used as a roofing material. [8] TPEs are also widely used for catheters where nylon block copolymers offer a range of softness ideal for patients. Thermoplastic silicone and olefin blends are used for extrusion of glass run and dynamic weatherstripping car profiles. Styrene block copolymers are used ...
The finished roof's thickness is usually between 30 and 120 mils (thousandths of an inch; 0.75 mm to 1.50 mm). The most commonly used cured elastomer membranes are ethylene propylene diene monomer (commonly EPDM ) and neoprene, although all thermoset products combined fail to account for more than 10% of all commercial roofing.
Isobutylene (or 2-methylpropene) is a hydrocarbon with the chemical formula (CH 3) 2 C=CH 2. It is a four-carbon branched alkene (olefin), one of the four isomers of butylene . It is a colorless flammable gas, and is of considerable industrial value.
EVA is made by mixing ethylene and vinyl acetate in a processor, which creates an unrefined mass of EVA. It is fed through rollers that flatten it into sheets, which are then put into a pressure oven. [2] Ethylene-vinyl acetate is based on products from the production of petroleum and natural gas.
In a test at the end of 212 days' incubation, emissions recorded were 5.8 nmol g −1 d −1 of methane, 14.5 nmol g −1 d −1 of ethylene, 3.9 nmol g −1 d −1 of ethane, and 9.7 nmol g −1 d −1 of propylene. When incubated in air, LDPE emits methane and ethylene at rates about 2 times and about 76 times, respectively, more than in water.
It is constructed from a thin sheet of ultra-high-molecular-weight polyethylene (UHMWPE, "Dyneema") laminated between two sheets of polyester. [ 1 ] [ 2 ] It is used in various applications that call for a fabric with high tensile strength , but where low weight is desirable, such as sails and ultralight backpacking equipment.