Search results
Results From The WOW.Com Content Network
Aerogels may be used to separate oil from water, which could for example be used to respond to oil spills. [104] [81] [76] Aerogels may be used to disinfect water, killing bacteria. [105] [106] Aerogel can introduce disorder into superfluid helium-3. [107] In aircraft de-icing, a new proposal uses a carbon nanotube aerogel. A thin filament is ...
Aerographene or graphene aerogel is the least dense solid known to exist, at 160 g/m 3 (0.0100 lb/cu ft; 0.16 mg/cm 3; 4.3 oz/cu yd). [1] The material reportedly can be produced at the scale of cubic meters.
Boron nitride aerogel is an aerogel made of highly porous boron nitride (BN). It typically consists of a mixture of deformed boron nitride nanotubes and nanosheets . It can have a density as low as 0.6 mg/cm 3 and a specific surface area as high as 1050 m 2 /g, and therefore has potential applications as an absorbent , catalyst support and gas ...
Main page; Contents; Current events; Random article; About Wikipedia; Contact us
*5 MPa is 5 ⋅ 10 6 Pascals or 5 ⋅ 10 6 Newtons per meter 2 or about fifty atmospheres pressure. *Solidity ≡ the ratio of the volume of solid to the bulk volume, or the ratio of bulk density to solid grain density d B /d G .
CNCs could also be made to gel in water under low power sonication giving rise to aerogels with the highest reported surface area (>600m2/g) and lowest shrinkage during drying (6.5%) of cellulose aerogels. [66] In another study by Aulin et al., [68] the formation of structured porous aerogels of nanocellulose by freeze-drying was demonstrated ...
The amount of mass that can be lifted by hydrogen in air per unit volume at sea level, equal to the density difference between hydrogen and air, is: (1.292 - 0.090) kg/m 3 = 1.202 kg/m 3. and the buoyant force for one m 3 of hydrogen in air at sea level is: 1 m 3 × 1.202 kg/m 3 × 9.8 N/kg= 11.8 N
The previous record of 1.0 mg/cm 3 was held by silica aerogels, and aerographite is claimed to have a density of 0.2 mg/cm 3. [11] Mechanically, these microlattices are behaviorally similar to elastomers and almost completely recover their shape after significant compression. [ 12 ]