When.com Web Search

Search results

1. Results From The WOW.Com Content Network

2. ISO 5775 - Wikipedia

   en.wikipedia.org/wiki/ISO_5775

   The inner width of the rim on which the tire is mounted should be about 65% of the tire's nominal section width for tires smaller than 30 mm and 55% for those larger. The section height of a tire is usually identical to its section width (for tires less than 28 mm, 2.5 mm have to be added to the width to get the height).

3. Tire code - Wikipedia

   en.wikipedia.org/wiki/Tire_code

   To take a common example, 195/55R16 would mean that the nominal width of the tire is approximately 195 mm at the widest point, the height of the side-wall of the tire is 55% of the width (107 mm in this example) and that the tire fits 16-inch-diameter (410 mm) rims. The code gives a direct calculation of the theoretical diameter of the tire.

4. Wheel sizing - Wikipedia

   en.wikipedia.org/wiki/Wheel_sizing

   Modern road tires have several measurements associated with their size as specified by tire codes like 225/70R14. The first number in the code (e.g., "225") represents the nominal tire width in millimeters. This is followed by the aspect ratio (e.g.,"70"), which is the height of the sidewall expressed as a percentage of the nominal tire width.

5. Toyota GZ engine - Wikipedia

   en.wikipedia.org/wiki/Toyota_GZ_engine

   The 1GZ-FE is a 4,996 cc (5.0 L) 48-valve DOHC V12 engine with variable valve timing ().Bore is 81 mm and stroke is 80.8 mm, with a compression ratio of 10.5:1. The official power output advertised in Japan per the gentlemen's agreement is 206 kW (276 hp; 280 PS) at 5,200 rpm, though it was advertised as 220 kW (295 hp; 299 PS) in export markets.

6. V12 engine - Wikipedia

   en.wikipedia.org/wiki/V12_engine

   Two more V12s appeared in the 1909-1910 motor boat racing season. The Lamb Boat & Engine Company in the United States built a 25.5 L (1,559 cu in) engine for the company's 10 m (32 ft) 'Lamb IV' boat. The Orleans Motor Company built a massive 56.8 L (3,464 cu in) flathead V12 engine with a power output quoted as "nearly 298 kW (400 bhp)".

7. Motorcycle tyre - Wikipedia

   en.wikipedia.org/wiki/Motorcycle_tyre

   As the early motorcycle industry progressed, larger tyre sizes accompanied larger engine displacements, so that by 1909–1914, 2 + 1 ⁄ 4 in (57 mm) section, 26 in (660 mm) diameter tyres were used on 250 to 350 cc (15 to 21 cu in) motorcycles, and 2 + 3 ⁄ 8 to 2 + 1 ⁄ 2 in (60 to 64 mm) section tyres appeared on motorcycles with ...